HYTE Y70 Touch Infinite E-ATX Mid Tower Cabinet (White)

The HYTE Y70 Touch Infinite (White) is a dual-chamber E-ATX mid-tower PC case built for enthusiast-grade gaming builds that demand both visual presence and thermal headroom. Its defining feature is a factory-integrated 14.5-inch capacitive touchscreen with a 688 × 2560 (2.5K) resolution, 60 Hz refresh rate, 183 PPI pixel density, 350 nits brightness, 1500:1 contrast ratio, 89-degree viewing angle, and 20 ms pixel response time. The panel supports 5-point multi-touch and is powered by HYTE Nexus software, enabling extensive screen customisation without any additional hardware. The case supports motherboards from Mini-ITX through E-ATX and accommodates graphics cards up to 422 mm long and 105 mm thick via a 4-slot vertical mount. Included in the box is a colour-matched PCIe 4.0 x16 riser cable that enables a clean, unobstructed view of the GPU through the 3-piece panoramic tempered glass side panel. Cooling flexibility is a clear priority. The side chamber accepts a radiator up to 360 mm long and 125 mm thick, while the adjustable top bracket supports a 360 mm radiator up to 68 mm thick. The bottom cold-floor zone fits up to three 120 mm or two 140 mm fans (max 32 mm thick), and a single 120/140 mm fan or radiator slot is available at the rear. Total fan capacity across the chassis is 10 fans. CPU coolers up to 180 mm tall are supported, and dust filters are present on the top, side, and bottom panels. Cable management is handled through an L-shaped moulded rubber grommet, dedicated routing channels, tie-down points, and reusable Velcro straps. Storage provisions include two 3.5-inch HDD bays or up to four 2.5-inch SSD sleds, which eject tool-lessly from the rear panel. Front I/O comprises one USB-C 3.2 Gen 2 port, two USB-A 3.2 Gen 1 ports, and a 3.5 mm audio/mic combo jack. Verified Specifications: - Model: CS-HYTE-Y70TTI-WW - Form Factor: Dual Chamber Mid-Tower (E-ATX) - Exterior Dimensions: 470 × 320 × 470 mm | Volume: 70.7 L - Motherboard Support: ITX, mATX, ATX, E-ATX - Expansion Slots: 7 half-height + 4 full-height - Max GPU Length: 422 mm | Max GPU Thickness: 105 mm - Max CPU Cooler Height: 180 mm | Max PSU Length: 235 mm - Display: 14.5" 688×2560 2.5K, 60 Hz, 5-pt touch, 183 PPI, 350 nits, 1500:1 contrast, 20 ms response - Riser Cable: PCIe 4.0 x16 (included) - Storage: 2× 3.5" HDD or 4× 2.5" SSD - I/O: 1× USB-C 3.2 Gen 2, 2× USB-A 3.2 Gen 1, 1× 3.5 mm combo jack - Warranty: 3 Years