ANTEC C8 EATX Full Tower Cabinet (White)

The ANTEC C8 White is a full-tower E-ATX cabinet built for enthusiast and high-performance PC builds that demand expansive cooling headroom and unobstructed component visibility. At its core, the C8 features a 270° panoramic tempered glass design achieved through a 45° bevelled joint where the front and left panels meet, creating a near-seamless edge that enhances the visual showcase of internal components and lighting effects without unsightly gaps between panels. The dual-chamber layout separates the primary components — CPU, GPU, and cooling hardware — in the left chamber from the power supply and storage drives in the right chamber. This segregation supports independent airflow paths and cleaner cable management, reducing thermal crosstalk between the power delivery and main compute zones. Cooling capability is a standout feature of the C8. The chassis supports up to 10 fans simultaneously, with positions at the top (3×120mm / 3×140mm / 2×160mm), bottom (3×120mm / 3×140mm / 2×160mm), side (3×120mm / 2×140mm), and rear (1×120mm or 140mm). Radiator support spans top, bottom, and side positions each accepting up to 360mm units, enabling simultaneous triple-radiator liquid cooling configurations. Interchangeable bottom fan brackets accommodate fans of varying sizes. A full-sized pull-out dust filter at the bottom and mesh panels on the top and right side promote sustained airflow while limiting dust accumulation. Motherboard compatibility covers E-ATX (up to 280mm width), ATX, Micro-ATX, and Mini-ITX form factors. Eight reusable PCIe expansion slot covers are included, and the chassis accommodates vertical GPU riser bracket installations after cover removal. Graphics cards up to 440mm in length are supported, making the C8 compatible with wide modern GPUs including RTX 40-series triple-fan designs. CPU coolers up to 175mm tall fit without modification, and power supplies up to 210mm in length (excluding cables) are supported via a rubber-padded PSU bracket that also accepts side-interface units. Storage capacity reaches six drives: two 3.5" HDDs and four 2.5" SSDs via modular drive trays. The I/O panel on the front provides two USB 3.0 Type-A ports, one USB Type-C port operating at 10 Gbps, and a combined headphone/microphone 3.5mm jack, alongside power and reset buttons with dust plugs for port protection. The chassis construction uses a combination of 0.8mm and 1.0mm steel with tool-free quick-release panels on the front, top, and sides to simplify component installation and maintenance. Net weight is 10.48 kg. Verified Specifications: • Dimensions: 464 × 303 × 476 mm (D×W×H) • Form Factor: Full Tower • Motherboard Support: E-ATX (≤280mm), ATX, M-ATX, ITX • Side Panel: 4mm Tempered Glass (both sides) • Fan Support — Top: 3×120 / 3×140 / 2×160mm | Bottom: 3×120 / 3×140 / 2×160mm | Side: 3×120 / 2×140mm | Rear: 1×120 or 140mm • Radiator Support — Top/Bottom/Side: up to 360mm | Rear: 120mm • Max GPU Length: ≤440mm • Max CPU Cooler Height: ≤175mm • Max PSU Length: ≤210mm (without cable) • Drive Bays: 2×3.5" HDD + 4×2.5" SSD • Expansion Slots: 8 • Front I/O: USB 3.0 ×2, USB Type-C 10Gbps ×1, Headphone/Mic combo jack • Dust Filter: Full-sized pull-out (bottom) • Net Weight: 10.48 kg | Gross Weight: 13.47 kg • Materials: Steel + Plastic + Glass • Warranty: 2 Years