HYTE Y70 EATX Mid Tower Cabinet ( Matcha Milk )

The HYTE Y70 in Matcha Milk is a dual-chamber EATX mid-tower cabinet designed around a three-piece panoramic tempered glass panel that puts your entire build on display. With exterior dimensions of 470 × 320 × 470 mm and a 70.7-litre internal volume, the Y70 strikes a balance between a large interior and a relatively compact footprint for an EATX-class chassis. One of the standout design decisions is the 4-slot vertical GPU mount. This layout creates visible airflow space between the graphics card and the side glass while accommodating cards up to 422 mm long and 105 mm thick — broad enough for today's largest consumer graphics cards. A colour-matched PCIe 4.0 x16 riser cable is included in the box, eliminating the need for a third-party purchase and keeping the aesthetic consistent with the soft Matcha Milk colourway. Cooling flexibility is a genuine highlight. The side panel accepts a radiator up to 360 mm long and 125 mm thick, while the adjustable top bracket supports another radiator up to 360 mm long and 68 mm thick. The bottom chamber can house up to three 120 mm or two 140 mm fans at up to 32 mm thickness, directing fresh air directly toward the vertically mounted GPU. A single 120/140 mm fan position at the rear rounds out the system, giving the Y70 a total capacity of 10 fans in a fully populated configuration. CPU cooler clearance reaches 180 mm, making virtually all tower air coolers compatible. Motherboard compatibility spans ITX, mATX, ATX, and EATX form factors, while expansion is handled by seven half-height and four full-height PCIe slots. Front-panel I/O includes one USB-C 3.2 Gen 2 port, two USB-A 3.2 Gen 1 ports, and a 3.5 mm audio/microphone combo jack. Storage options extend to two 3.5-inch hard drives or four 2.5-inch SSDs via tool-less floating storage sleds accessible from the rear panel. Cable management is addressed through an L-shaped moulded rubber grommet, dedicated routing channels, tie-down points, and reusable Velcro straps — all housed in the secondary chamber hidden behind the main motherboard tray. Dust filtration covers the top, side, and bottom intake positions. PSU clearance extends to 235 mm. The Matcha Milk colourway pairs soft cream-green tones across the chassis panels and a colour-matched canopy, offering a distinctive alternative to conventional black or white cases. HYTE backs the Y70 with a 4-year warranty. Verified Specifications: • Model: CS-HYTE-Y70-MM • Form Factor: Dual Chamber Mid-Tower, EATX/ATX/mATX/ITX support • Exterior Dimensions: 470 × 320 × 470 mm | Volume: 70.7 L • GPU Support: Up to 422 mm long, 105 mm thick, 4-slot vertical mount • CPU Cooler Clearance: 180 mm • Riser Cable: PCIe 4.0 x16 (included) • Side Radiator: Up to 360 mm / 125 mm thick • Top Radiator: Up to 360 mm / 68 mm thick • Total Fan Capacity: 10 (side 3×120/2×140, top 3×120/2×140, bottom 3×120/2×140 @32 mm, rear 1×120/140) • Expansion Slots: 7 half-height + 4 full-height • I/O: 1× USB-C 3.2 Gen 2, 2× USB-A 3.2 Gen 1, 1× 3.5 mm audio/mic • Storage: 2× 3.5" HDD or 4× 2.5" SSD • PSU Clearance: 235 mm • Dust Filters: Top, Side, Bottom • Warranty: 4 Years