Lian Li Lancool 216 ARGB E-ATX Mid Tower Case

The Lian Li Lancool 216 ARGB is a full-mesh mid-tower chassis designed to support both air-cooled and water-cooled PC builds. Its standout feature is an all-around mesh panel design — the front mesh panel extends seamlessly into the top, ensuring a continuous, unobstructed airflow path from intake to exhaust across the entire build. Out of the box, the Lancool 216 RGB variant comes with three pre-installed fans: two 160mm ARGB front fans and one 140mm PWM rear fan. The 160mm ARGB fans feature dual LED channels — one along the outer rim and one at the blade shaft — controllable independently via a 5V 3-pin ARGB motherboard header. A SATA-powered fan hub located behind the motherboard tray supports up to four ARGB and PWM fans simultaneously. A key design advantage is the modular motherboard I/O position. Users can raise the motherboard for air-cooled configurations, or lower it to create a 63mm gap at the top — ideal for AIO or custom loop radiator installations. The case supports up to 360mm radiators at both the front and top positions, and a 240mm radiator at the bottom. Total fan support reaches a maximum of 10 fans across all mounting zones. For GPU enthusiasts, the Lancool 216 accommodates graphics cards up to 392mm in length and 180mm in height, making it compatible with high-end discrete graphics cards. An included PCIe fan bracket at the rear allows an additional 120mm fan to be fitted without obstructing GPU I/O, while a rotatable PCIe expansion panel enables vertical GPU mounting with an optional riser cable (not included). The front I/O panel — featuring a power button, reset button, two USB 3.0 ports, one USB Type-C port, and a combined audio jack — can be relocated to the lower-left of the front panel, offering flexibility in desk placement and cable routing. Cable management is addressed through three large velcro straps along the grommet bar, three small rear-panel clips, and two PSU-area velcro straps. Verified Specifications: - Dimensions: 480.9mm (D) × 235mm (W) × 491.7mm (H) - Motherboard Support: E-ATX (under 280mm width), ATX, Micro-ATX, Mini-ITX - Material: Steel body with 4.0mm tempered glass side panel - Pre-installed Fans: 2 × 160mm ARGB (front), 1 × 140mm PWM (rear) - Max Fan Support: 10 fans - Radiator Support: Front 360/280/240mm; Top 360/280/240mm; Bottom 240mm - GPU Clearance: 392mm (length), 180mm (height, air cooling mode) - CPU Cooler Clearance: 180.5mm - PSU Support: ATX, up to 220mm - Drive Bays: 2 × 2.5" SSD (drive cage) + 2 × 3.5" HDD; 2 × 2.5" SSD (PSU cover); 2 × 2.5" SSD (behind MB tray) - Expansion Slots: 7 - Dust Filters: 1 × bottom (magnetic front panel filter available as optional accessory) - Warranty: 1 Year