Cougar Airface Eco RGB White E-ATX Mid Tower Case

The COUGAR Airface Eco RGB (CGR-5YA2W-RGB) is a white E-ATX mid-tower case built around airflow-first engineering. Its defining feature is a set of coned vents on the front panel that taper inward from a wide opening, channelling air more efficiently into the chassis using thermodynamic principles. This means more airflow for less fan energy, which benefits both system temperatures and long-term power draw. Three ARGB fans ship pre-installed out of the box: two 180mm PWM fans on the front (300–1,200 ± 10% RPM, 5V 3-pin ARGB + 4-pin PWM connectors) and one 120mm ARGB exhaust fan at the rear (1,000 ± 10% RPM, 5V 3-pin ARGB + 3-pin fan connector). The fan controller syncs with your motherboard's ARGB header, so lighting is coordinated across your entire build without extra software. Dust management is handled on all three ventilated sides: the front panel uses a quick-slide dust filter with a rubber pull-tab that removes without detaching the front panel, the top filter attaches magnetically, and the bottom filter slides out for easy cleaning. The removable top panel opens up interior access for assembly, while the detachable front bracket streamlines radiator and fan installation. The modular front I/O block can be repositioned to the top or bottom of the case, keeping your ports and buttons accessible regardless of desk orientation. It includes one USB 3.2 Gen 2 Type-C port, two USB 3.0 Type-A ports, a 4-pole headset audio jack, and an RGB button. GPU support accommodates cards up to 390mm in length and can be mounted horizontally or vertically — vertical GPU clearance has been revised for improved airflow around the card. Cable routing has been expanded compared to previous generations for cleaner builds. Verified Specifications: - Form factor: E-ATX, CEB, ATX, Micro-ATX, Mini-ITX - Colour: White - Pre-installed fans: 2 × 180mm ARGB PWM (front), 1 × 120mm ARGB (rear) - 180mm fan speed: 300–1,200 ± 10% RPM | 120mm fan speed: 1,000 ± 10% RPM - Max GPU length: 390mm (horizontal or vertical) - Max CPU cooler height: 190mm - Max PSU length: 200mm - Expansion slots: 7 (convertible from horizontal to vertical) - Fan support: Front 3 × 120mm / 2 × 140mm / 2 × 180mm; Top 3 × 120mm / 2 × 140mm; Rear 1 × 120mm or 140mm - Radiator support: Front & top up to 360mm; Rear up to 140mm - Drive bays: 2 × 3.5" HDD, 2 × 2.5" SSD (trays included) - Dust filters: Front (quick-slide), Top (magnetic), Bottom (slide-out) - Front I/O: 1 × USB 3.2 Gen 2 Type-C, 2 × USB 3.0 Type-A, 4-pole audio jack, RGB button - ARGB sync: 5V 3-pin motherboard header - Warranty: 1 Year