Fractal Design Torrent Compact TG Light Tint RGB (E-ATX) Mid Tower Cabinet (Black)

The Fractal Design Torrent Compact TG Light Tint RGB is a mid tower case engineered to deliver maximum air-cooling performance in a compact footprint that still accommodates E-ATX motherboards up to 274 mm wide. At its core is an open front grille paired with two pre-installed 180 x 38 mm Prisma AL-18 ARGB PWM fans that pull large volumes of air directly onto your components. Because the fans are oversized relative to a standard 140 mm slot, they can move comparable airflow at lower RPMs, keeping noise levels in check without sacrificing thermal headroom. The interior layout follows a top-mounted PSU configuration, which clears the floor of the chassis and opens up GPU clearance up to 330 mm (with front fans mounted). This arrangement also creates an unobstructed path from the bottom intake dust-filtered vents to the GPU, supporting exceptional graphics card cooling potential when the bottom PCI slot is left free. The PSU shroud features an integrated ARGB strip for seamless lighting continuity across the build. Both side panels are tempered glass with a light tint, secured by bolt-free top-latching mechanisms rather than traditional screws, making component access straightforward. All ARGB fans and LED lighting are controllable through any 5 V addressable RGB header on a compatible motherboard — no proprietary controller required. Cable management is addressed through 20 mm of routing space behind the motherboard tray, fixed cable straps, and rubber-grommetted routing holes. Storage is handled by one combined 3.5"/2.5" drive tray and three dedicated 2.5" SSD brackets. The front I/O panel provides a USB 3.1 Gen 2 Type-C port, two USB 3.0 ports, and a combined audio jack. For builders who want liquid cooling, the front supports radiators up to 360 x 120 mm or 280 x 140 mm (up to 403 mm length in push/push-pull), and the bottom supports up to 240 x 120 mm or 280 x 140 mm. A single 120 mm rear fan mount is included but the fan is not pre-installed. Verifiable Specifications: - Form factor: Mid tower | Motherboard support: E-ATX (up to 274 mm), ATX, mATX, Mini-ITX, SSI-CEB - Dimensions (L x W x H): 450 x 222 x 467 mm | Net weight: 8.0 kg - Pre-installed fans: 2x Prisma AL-18 ARGB PWM 180 x 38 mm (front) - Total fan mounts: 2x 180 mm, 4x 140 mm, or 6x 120 mm (with included brackets) - GPU max length: 330 mm (front fan mounted) | CPU cooler max height: 174 mm - PSU max length: 210 mm (ATX) | Expansion slots: 7 - Front radiator: up to 360 x 120 mm / 280 x 140 mm | Bottom radiator: up to 240 x 120 mm / 280 x 140 mm - Drive bays: 1x 3.5"/2.5" (included), 3x dedicated 2.5" SSD brackets (included) - Front I/O: 1x USB 3.1 Gen 2 Type-C, 2x USB 3.0, Audio - Dust filters: Front, Bottom | Cable routing space: 20 mm - Side panels: Dual tempered glass (light tint) | Warranty: 2 years