Feature of HYPERX Fury RGB 240GB 2.5 SATA SATA 3 Solid State Drive (SSD)
HyperX Fury RGB 240GB is an ssd storage of the HyperX Brand. HyperX is a brand that is known to make some of the best M.2, Sata & NVME Solid State Drives. The Form factor of this Solid State Drive is 2.5 inch SATA.
The Storage Size of the SSD is 240GB with a Read Speed of 550 MBps. The write speed of the SSD is 480 MBps and has a weight of 165g.
The NAND Type of the SSD is 3D TLC and the SSD has a warranty of 3 Years. A solid-state drive has a lot of benefits for your Gaming PC.
Not only does it help in faster Read-Write Speeds to and from the SSD, but it also helps the PC boot much faster if your operating system is in the SSD.
Daisy chain to other RGB devices
Sync up RGB effects across your system internals for a rig that any builder would envy.
Up to 10x faster than a hard drive
Cutting-edge 3D NAND technology pumps out incredible performance.
Aggressive styling
Separate yourself from blocky, squared builds with FURY RGB’s fierce design.
Specifications of HYPERX Fury RGB 240GB 2.5 SATA SATA 3 Solid State Drive (SSD)
| Model | SHFR200/240G |
| Interface | 2.5” |
| Interface | SATA Rev. 3.0 (6Gb/s) – with backwards compatibility to SATA Rev. 2.0 (3Gb/s) |
| Capacity | 240GB |
| Controller | Marvell 88SS1074 |
| NAND | 3D TLC |
| Sequential Read/Write | up to 550/480MB/s |
| Power Consumption | 0.2W Idle / 0.6W Avg / 1.2W (MAX) Read / 2.5 W (MAX) Write |
| Dimensions | 100.14mm x 69.85mm x 9.5mm |
| Operating temperature | 0°C~70°Cc |
| Storage temperature | -40°C~85°C |
| Vibration operating | 2.17G Peak (7–800Hz) |
| Vibration non-operating | 20G Peak (10–2000Hz) |
| Life expectancy | 1 million hours MTBF |
| Total Bytes Written (TBW) | 120TB |
| Warranty | 3 Years |
| Note | ***Features, Price and Specifications are subject to change without notice. |
Reviews
There are no reviews yet.