Cougar FV150 Mini M-ATX Mini Tower Case

The Cougar FV150 Mini is a compact Mini Tower case built for builders who want a clean, component-showcasing setup without sacrificing performance headroom. Its dual-chamber layout separates your primary build area — visible through a glass panel — from the secondary chamber that neatly conceals the PSU, storage drives, and cabling. The result is a tidy, clutter-free aesthetic that suits desks and workspaces where space is at a premium. Despite its compact footprint, the FV150 Mini does not compromise on compatibility. It supports Micro-ATX and Mini-ITX motherboards, including reverse-connector motherboard configurations that allow near-zero-cable routing through the primary chamber. GPU clearance extends to 400mm, covering virtually all current high-performance graphics cards. CPU cooler height is supported up to 170mm, accommodating many tower air coolers, while the maximum PSU length is 200mm. Cooling flexibility is a standout trait of this chassis. It ships with three pre-installed 120mm fans — two mounted in a reversed orientation on the motherboard side and one at the rear — all spinning at 1,200 RPM (±10%) via 4-pin connectors. Additional fan mounts bring total fan capacity to nine. The top and bottom each accept up to three 120mm or two 140mm fans, the motherboard-side panel takes up to two 120mm or two 140mm fans, and the rear hosts one 120mm fan. Water-cooling support reaches up to a 360mm radiator on top and a 240mm or 280mm radiator on the side panel, giving AIO users strong configuration options. Front I/O is modern and practical: one USB 3.2 Gen 2 Type-C port (10 Gbps), two USB 3.0 Type-A ports (5 Gbps), a 4-pole headset audio jack, and a restart button. Storage provisions include one 3.5-inch drive bay and two 2.5-inch drive bays. Four expansion slots (break-off style) accommodate most GPU and PCIe card configurations, though vertical GPU mounting is not supported. Magnetic dust filters on the top and bottom help reduce particulate ingress and simplify routine cleaning. Key Verified Specifications: - Form Factor: Mini Tower (Micro-ATX, Mini-ITX, Reverse Connector M/B) - Color: Black (SKU: CGR-2QA6B-RGB) - Max GPU Length: 400mm - Max CPU Cooler Height: 170mm - Max PSU Length: 200mm - Pre-installed Fans: 3 × 120mm (2 side reversed + 1 rear), 1,200 RPM ±10%, 4-pin - Total Fan Support: Up to 9 fans - Radiator Support: Top 360/280/240mm; Side 280/240mm - Front I/O: USB 3.2 Gen 2 Type-C ×1, USB 3.0 Type-A ×2, Audio Jack, Restart Button - Drive Bays: 1 × 3.5-inch, 2 × 2.5-inch - Expansion Slots: 4 (break-off) - Dust Filters: Top (magnetic), Bottom - Warranty: 1 Year