HYTE X50 ATX Mid Tower Cabinet ( Matcha )

The HYTE X50 Mid Tower Cabinet in Matcha is a thoughtfully engineered PC enclosure that combines premium acoustic materials with multi-dimensional airflow design. Built around a 1mm steel chassis with ABS accents, the X50 occupies a 63-litre volume (485mm H × 510mm L × 255mm W) while supporting an extensive range of hardware configurations. At the front of the feature set is the patent-pending Louvered Blade Ventilation system. The angled blade geometry reduces exhaust impedance, allowing hot air to escape efficiently while simultaneously reinforcing chassis rigidity — a dual-purpose structural innovation. The side panel is formed from 4mm thick laminated acoustic glass, which is designed to dampen noise transmission passively. A bonding layer holds the glass together to prevent shattering into loose fragments. Cooling flexibility is a clear priority. The X50's Cold-Floor Cooling architecture channels direct airflow to the graphics card through the bottom chamber, which accepts up to three 120mm fans (up to 32mm thick). The front panel supports three 120mm or 140mm fans, the side accepts a further three 120mm fans, and a single 120mm fan mounts at the rear — totalling up to 10 fan positions. Radiator compatibility extends to a 360mm unit on the side (up to 70mm thick) and front (up to 105mm thick), with a 120mm rear option as well. The Structural PSU Canopy sits beneath the motherboard tray and houses the power supply (up to 223mm length). Pre-routed cable channels and included velcro tie-down straps — positioned both inside and outside the chassis — make cable management systematic rather than an afterthought. Motherboard support spans E-ATX (up to 10.6 inches), ATX, Micro-ATX, and Mini-ITX, providing broad build flexibility. Graphics cards up to 430mm in length and 160mm in height are accommodated, and CPU coolers up to 170mm tall fit without modification. Seven full-size horizontal expansion slots handle multi-slot GPU and PCIe card configurations. Front I/O includes a USB 3.2 Gen 2×2 Type-C port (up to 20 Gbps), two USB 3.2 Gen 1×1 Type-A ports, a 3.5mm audio/mic combo jack, and a tactile mechanical power switch with LED indicator. A bottom-mounted magnetic dust filter protects the intake zone. Storage mounts cover two 2.5-inch drives and one 3.5-inch drive. Verified Specifications: • Form Factor: ATX Mid-Tower | Volume: 63L • Dimensions: 485mm (H) × 510mm (L) × 255mm (W) • Chassis: 1mm steel + ABS; Side panel: 4mm laminated acoustic glass • Motherboard: E-ATX (≤10.6″), ATX, M-ATX, ITX • Max GPU: 430mm length, 160mm height | Max CPU cooler: 170mm • Max PSU: 223mm | Expansion slots: 7 horizontal full-size • Fan support: up to 10 × 120mm (side 3×, front 3×, bottom 3×, rear 1×) • Radiator: 360mm side/front, 120mm rear • Storage: 2× 2.5", 1× 3.5" • Front I/O: USB 3.2 Gen 2×2 Type-C, 2× USB 3.2 Gen 1 Type-A, 3.5mm combo jack • Dust filter: bottom magnetic | Warranty: 4 years • SKU / Product Code: CS-HYTE-X50G-MM