Antec C8 ARGB E-ATX Full Tower Case – Dual Chamber with 270° Tempered Glass

The Antec C8 ARGB is a full-tower PC case engineered for high-performance builds that demand exceptional airflow, ample cooling headroom, and a commanding visual presence. The chassis is constructed from 0.8mm and 1.0mm steel panels combined with plastic accents and glass, striking a balance between rigidity and accessible assembly. Tool-free quick-release panels on the front, top, and sides simplify component installation and routine maintenance. The defining aesthetic feature is the 270° panoramic tempered glass enclosure formed by a 4mm side panel and a front panel joined using a 45° beveling technique. The fine edge where the two glass surfaces meet minimises visual interruption, giving an unobstructed view of internal components and lighting effects from three angles simultaneously. The interior follows a dual-chamber design: the primary chamber on the left side houses the motherboard, CPU, and GPU, while a separate right-side chamber keeps the power supply and drive bays isolated. This separation helps direct warm air away from storage and power components without impeding CPU and GPU cooling paths. Cooling capability is a core strength of the C8 ARGB. The case ships with three pre-installed fans — two 160×35mm Tranquil Reverse ARGB PWM fans positioned at the bottom and one 140×25mm Tranquil ARGB PWM fan at the rear — and supports up to ten fans in total. The top, bottom, and side positions each accept up to a 360mm radiator simultaneously, enabling an extreme liquid-cooling configuration with multiple loops if required. Motherboard support extends to E-ATX boards up to 280mm wide, along with standard ATX, Micro-ATX, and Mini-ITX form factors. Eight expansion slots with reusable PCIe covers accommodate multi-card or vertical GPU riser configurations, and the case can house graphics cards up to 440mm in length — sufficient for wide RTX 40-series designs. CPU coolers up to 175mm tall fit comfortably, and power supplies up to 210mm in length (without cables attached) are supported by a stylish PSU bracket with a rubber scratch-prevention pad. Storage options include two 3.5-inch HDD bays and four 2.5-inch SSD trays via modular, interchangeable drive brackets. Cable management is aided by four interior velcro straps, two rear velcro straps, and six cable-routing rubber grommets. The front I/O panel provides two USB 3.0 Type-A ports, one USB Type-C port running at 10 Gbps, and a combined headphone/microphone jack alongside power and reset buttons. Verified Specifications: – Model: C8-BLACK-ARGB – Dimensions (D×W×H): 464 × 303 × 476 mm – Form Factor: Full Tower – Motherboard Support: E-ATX (up to 280mm), ATX, Micro-ATX, Mini-ITX – Side Panel: 4mm Tempered Glass – Steel Thickness: 0.8mm + 1.0mm – Expansion Slots: 8 – Included Fans: 2 × 160×35mm Tranquil Reverse ARGB PWM (bottom) + 1 × 140×25mm Tranquil ARGB PWM (rear) – Max Fan Support: 10 total – Fan Positions — Top: 3×120mm / 3×140mm / 2×160mm; Side: 3×120mm / 2×140mm; Bottom: 3×120mm / 3×140mm / 2×160mm; Rear: 1×120mm or 1×140mm – Radiator Support — Top/Side/Bottom: up to 360mm; Rear: 120mm – Max GPU Length: ≤ 440mm – Max CPU Cooler Height: ≤ 175mm – Max PSU Length: ≤ 210mm (without cable) – Storage: 2 × 3.5″ HDD + 4 × 2.5″ SSD – Dust Filters: Bottom pull-out; Top and Right side full mesh panels – Front I/O: USB 3.0 × 2, USB Type-C 10Gbps × 1, Headphone/Mic combo – Net Weight: 11.84 kg | Gross Weight: 14.38 kg – Warranty: 2 Years