FSP Hexa 85+ Pro 750W ATX 3.1 80 Plus Bronze Non-Modular Power Supply

The FSP Hexa 85+ Pro 750W is a non-modular ATX power supply built to the latest ATX12V V3.1 and EPS12V V2.92 standards, making it ready for current-generation platforms that demand tighter voltage regulation and transient response. It carries an 80 Plus Bronze certification, delivering efficiency of 85% or greater at typical load, which helps reduce heat output and electricity costs over long gaming or workstation sessions. The unit ships with a native PCIe 12V-2x6 connector, removing the need for adapters when pairing with modern discrete graphics cards that require the new connector standard. Power is distributed via a single +12V rail, a topology favoured for high-draw components such as gaming GPUs, ensuring headroom under demanding conditions. The 5V and 3.3V rails are handled by a DC-to-DC module design, which improves load regulation and reduces ripple noise on the minor rails — beneficial for storage drives and peripheral stability. Cooling is managed by a 120mm hydraulic bearing (HYB) fan. Hydraulic bearing fans combine the low-noise profile of sleeve bearings with improved longevity compared to standard sleeve designs, keeping acoustics low during typical loads. All cables are flat black ribbon-style, which eases routing even in a non-modular configuration. Protection circuits cover over-current (OCP), over-voltage (OVP), over-power (OPP), and short-circuit (SCP) scenarios, providing a safety net for connected components. Japanese electrolytic capacitors are used internally, a specification associated with greater thermal tolerance and lifespan compared to generic alternatives. Connector complement and verified specifications: - Model: HA2-750, Gen5 - Rated Output: 750W - Form Factor: ATX - Certification: 80 Plus Bronze - Input Voltage: 100–240V AC - Input Current: 10–5A - Input Frequency: 50–60Hz - PFC: Active (≥0.9) - Efficiency: ≥85% at typical load - Fan: 120mm Hydraulic Bearing (HYB) - Protection: OCP, OVP, OPP, SCP - Hold-Up Time: >17ms at 80% load - Connectors — 24-pin MB: 1 | CPU 4+4-pin: 2 | PCIe 12V-2x6: 1 | PCIe 6+2-pin: 2 | SATA: 8 | Molex: 2 | Floppy: 1 - Modular: Non-Modular - Warranty: 5 Years