Thermaltake CTE C750 TG ARGB White E-ATX Full Tower Case

The Thermaltake CTE C750 TG ARGB Snow is a full tower chassis built around Thermaltake's CTE (Centralized Thermal Efficiency) form factor. The defining feature of this design is a 90-degree rotation of the motherboard inside the case, which repositions the CPU closer to the front intake and the GPU closer to the rear exhaust. This layout creates independent airflow paths for each major heat-generating component, allowing cooler air to reach the CPU and GPU without the two thermal zones competing for the same intake stream. The case ships with three pre-installed 140mm CT140 ARGB PWM fans — one at the front (intake), one at the top (exhaust), and one at the rear (intake) — each rated at 1,500 RPM and 30.5 dBA. ARGB lighting on these fans can be controlled through motherboard-compatible software. Total fan capacity across all positions reaches up to fourteen 140mm fans, with additional support for 120mm and 200mm sizes at select locations. Radiator support is equally generous. The front, rear, and motherboard-side positions each accept up to a 420mm AIO radiator, while the bottom accepts up to a 360mm radiator. For custom loop builders, the source data indicates support for up to five simultaneous radiators (three 360mm and two 240mm units). A dedicated pump and reservoir bracket is included, along with Velcro straps for cable management. Two 4mm tempered glass panels — front and left side — provide a clear view of the internal build. Rotational PCI-E slots allow GPU installation in horizontal or vertical orientation, with an included riser cable bracket supporting both 90-degree and 180-degree riser cable configurations. Storage capacity stands at up to seven 3.5-inch drives or twelve 2.5-inch drives. Seven expansion slots are available. Front I/O includes one USB 3.2 Gen 2 Type-C, four USB 3.0 ports, and HD Audio. Verified Specifications: - Part Number: CA-1X6-00F6WN-01 - Form Factor: Full Tower (E-ATX, ATX, Micro-ATX, Mini-ITX support) - Dimensions (H × W × D): 565.2 × 327 × 599.2 mm (22.25 × 12.87 × 23.59 in) - Net Weight: 4.50 kg - Side Panels: 4mm Tempered Glass × 2 - Material: SPCC steel / ABS plastic - Color: White - Pre-installed Fans: 3 × 140mm CT140 ARGB PWM (1,500 RPM, 30.5 dBA) - Max Fan Capacity: Up to 14 × 140mm (across all positions) - Max Radiator: 420mm AIO (front, rear, MB side); 360mm (bottom) - CPU Cooler Max Height: 190mm - GPU Max Length: 420mm (without radiator), 370mm (with radiator) - PSU Max Length: 220mm (Standard PS2 ATX, not included) - Drive Bays: 7 × 3.5-inch or 12 × 2.5-inch - Expansion Slots: 7 - Front I/O: 1 × USB 3.2 Gen 2 Type-C, 4 × USB 3.0, HD Audio - Warranty: 3 Years