Kingston Fury Beast 64GB 6000MHz CL30 DDR5 RAM

The Kingston Fury Beast 64GB DDR5 kit (model KF560C30BBEK2-64) delivers 64 gigabytes of high-speed desktop memory in a convenient dual-module configuration of two 32 GB sticks. Running at a tested speed of 6000 MHz with a CL30 primary latency and operating voltage of 1.4 V, this UDIMM kit targets enthusiast gaming systems, content-creation workstations, and demanding multi-tasking environments that benefit from generous memory capacity paired with fast timings. DDR5 architecture underpins several structural improvements over its predecessor. The standard doubles the internal bank count from 16 to 32 and extends burst length from 8 to 16, enabling the controller to service more simultaneous memory requests. Two independent 32-bit subchannels replace the single 64-bit channel of DDR4, distributing traffic more efficiently across both modules. die ECC (ODECC) operates transparently on each module, detecting and correcting single-bit errors before they reach the processor — a meaningful stability aid when operating at elevated speeds. Each module integrates an module Power Management IC (PMIC) that regulates voltage locally rather than relying solely on the motherboard, contributing to cleaner power delivery at high frequencies. The heat spreader is a low-profile design, leaving room for tall CPU air coolers and maintaining compatibility across a wide range of ATX, micro-ATX, and ITX chassis. Overclocking support is provided through two industry-standard profile systems: AMD EXPO for Ryzen platforms and Intel XMP 3.0 for compatible Intel motherboards. XMP 3.0 introduces user-customisable profile slots alongside factory-programmed profiles, allowing fine-tuning of speeds, timings, and voltage from within the BIOS. Kingston states the kit has been qualified by leading motherboard manufacturers, helping ensure out-of-box compatibility when profiles are enabled. Verified Specifications: • SKU / Model: KF560C30BBEK2-64 • Capacity: 64 GB total (2 × 32 GB) • Memory Type: DDR5 UDIMM • Speed: 6000 MHz (DDR5-6000) • CAS Latency: CL30 • Operating Voltage: 1.4 V • DIMM Form Factor: 288-pin UDIMM • Kit Configuration: Dual-channel (2 modules) • Overclock Profiles: AMD EXPO, Intel XMP 3.0 • Die ECC: Yes (ODECC) • Warranty: Limited Lifetime For those requiring a different capacity or aesthetic, Kingston also offers this same 6000 MHz CL30 platform as a single 32 GB module (KF560C30BBE-32) and as an RGB variant with AMD EXPO (KF560C30BBEAK2-64)