Dawg P1000G 1000W 80 Plus Gold Fully Modular Power Supply (ATX 3.1, PCIe Gen 5)

The Dawg P1000G is a 1000-watt fully modular power supply built for high-performance gaming and enthusiast PC builds. Holding 80 Plus Gold certification, it delivers efficiency at or above 90% under typical loads, helping to reduce heat output and electricity consumption compared to lower-rated units. The unit is compliant with the ATX 3.1 specification and is ready for PCIe Gen 5 graphics cards, making it suitable for pairing with current and near-future discrete GPU hardware. Cable management is simplified through the fully modular design — every cable, including the main ATX connector, detaches completely, so unused cables never need to be stuffed into the chassis. A dedicated 12V-2x6 connector is included alongside four PCIe connectors, providing ample connectivity for multi-rail GPU configurations. The bundled cables are described as long and flat, which aids routing in mid-tower and full-tower cases. Cooling is handled by a 140 mm hydraulic-bearing fan, a bearing type known for quieter operation and extended service life compared to sleeve bearings. Dawg rates the P1000G with a mean time between failures (MTBF) of 60,000 hours, indicating a design emphasis on long-term reliability. The unit incorporates comprehensive circuit protection, though the specific protection types (OVP, UVP, OCP, SCP, OPP, OTP) are referenced in the source description without granular per-rail specifications being available at this time. Verifiable Specifications: • Model: Dawg P1000G • Rated output power: 1000 W • Efficiency rating: 80 Plus Gold • Form factor: ATX 3.1 • GPU connector standard: PCIe Gen 5 ready; includes dedicated 12V-2x6 connector • PCIe connectors: 4 (as stated in source) • Modular design: Fully modular • Fan size: 140 mm hydraulic bearing • MTBF: 60,000 hours • Price (INR): ₹11,399 • Availability: In stock (as of listing date) Note: Rail-level current specifications (e.g., +12V amperage, +5V, +3.3V) and exact dimensions/weight are not available in the current source data and should be added upon manufacturer datasheet verification