Adata XPG Lancer Blade RGB 32GB (16GBx2) 6000MHz CL30 DDR5 RAM

The ADATA XPG Lancer Blade RGB is a dual-channel DDR5 memory kit designed for desktop enthusiasts who want high-frequency performance without compromising case clearance. The kit pairs two 16 GB UDIMMs to deliver a combined 32 GB of capacity, running at a tested speed of 6000 MHz with tight CL30-40-40 primary timings at 1.4 V — specs verified across both source listings. The heatsink is deliberately slim. At just 7.86 mm tall (133.35 mm long × 40 mm wide), it sits well below the height of most tower CPU coolers, making it a practical choice for compact mid-tower and small-form-factor builds where taller heat-spreaders would obstruct airflow or simply not fit at all. RGB illumination is built into the heatsink assembly and is addressable through XPG PRIME lighting software or the native RGB control utilities from major motherboard vendors, allowing synchronisation with fans, GPU shrouds, and other addressable components in a unified light show. On the compatibility front, the kit ships with both Intel XMP 3.0 and AMD EXPO profiles stored module. A single BIOS toggle activates the rated 6000 MHz overclock on supported Intel and AMD platforms, removing the need for manual timing adjustments. die ECC is also present at the silicon level, providing background single-bit error correction inherent to the DDR5 standard. A dedicated Power Management IC (PMIC) is integrated on each module to regulate voltage and improve supply stability under sustained load — a standard architectural feature of DDR5 that migrates power regulation from the motherboard to the module itself. Verified specifications: • Part Number: AX5U6000C3016G-DTLABRBK • Memory Type: DDR5 UDIMM • Kit Configuration: 2 × 16 GB (32 GB total) • Tested Speed: 6000 MHz • Tested Timings: CL30-40-40 • Tested Voltage: 1.4 V | Operating Voltage Range: 1.35 V – 1.4 V • Form Factor Dimensions: 133.35 × 40 × 7.86 mm (L × W × H) • Lighting: Addressable RGB • Profile Support: Intel XMP 3.0, AMD EXPO • Operating Temperature: 0 °C to 85 °C • Storage Temperature: −20 °C to 65 °C • GTIN: 4711085944887 • Warranty: Limited Lifetime This kit is well-suited for gaming PCs, content-creation workstations, and any Intel or AMD platform that benefits from high-bandwidth, low-latency DDR5 memory in a low-profile form factor