Adata XPG Lancer Blade RGB White 16GB 6000MHz CL30 DDR5 RAM

The ADATA XPG Lancer Blade RGB is a single 16 GB DDR5 desktop memory module designed for builders who want high-frequency performance without sacrificing physical clearance. Running at a tested speed of 6000 MHz with primary timings of CL30-40-40 and an operating voltage of 1.35 V to 1.4 V, it is well suited for Intel and AMD platforms that support native DDR5 overclocking profiles. The module ships in a white finish and uses a low-profile heatsink measuring 133.35 mm × 40 mm × 7.86 mm (L×W×H). The reduced height makes it compatible with compact mid-tower and small-form-factor chassis where taller heatsinks would conflict with large CPU coolers. The heatsink features geometric line detailing that pairs cleanly with a wide range of case aesthetics. RGB illumination is built in and can be controlled through major motherboard manufacturers' lighting software or through ADATA's own XPG PRIME application, allowing synchronisation with other supported components for a coordinated lighting setup. On the platform-compatibility side, the module supports both Intel XMP 3.0 and AMD EXPO overclocking profiles, enabling one-click frequency configuration in BIOS without manual timing adjustments. die ECC error correction is included, which helps maintain data integrity during intensive workloads by detecting and correcting single-bit errors at the chip level. ADATA states the module has undergone component selection, screening, and compatibility testing, and it carries a limited lifetime warranty. Verifiable Specifications: • Part Number: AX5U6000C3016G-SLABRWH • Capacity: 16 GB (1 × 16 GB) • Memory Type: DDR5 • Speed: 6000 MHz • Timings: CL30-40-40 • Operating Voltage: 1.35 V – 1.4 V • DIMM Type: UDIMM • Profile Support: Intel XMP 3.0, AMD EXPO • Dimensions (L×W×H): 133.35 × 40 × 7.86 mm • Color: White • Lighting: RGB • Operating Temperature: 0 °C to 85 °C • Storage Temperature: −20 °C to 65 °C • GTIN: 4711085940811 • Warranty: Limited Lifetime