Addlink S70 1TB M.2 NVMe SSD

The Addlink S70 1TB M.2 NVMe SSD (SKU: AD1TBS70M2P) is a high-performance solid-state drive built for demanding workloads including gaming, digital audio and video production, and professional applications that require sustained throughput without system slowdowns. Built on the PCIe Gen3 x4 interface with NVMe 1.3 protocol, the S70 leverages four simultaneous data lanes to deliver sequential read speeds of up to 3,400 MB/s and sequential write speeds of up to 3,000 MB/s. These figures are based on addlink's internal testing using CrystalDiskMark software; actual performance may vary depending on system configuration, interface conditions, and usage patterns. The drive uses 3D NAND flash memory, a technology designed to overcome the density and endurance limitations of traditional 2D planar NAND. A RAID engine combined with LDPC (Low-Density Parity Check) error-correction coding protects data integrity, while dynamic thermal throttling helps maintain stable operation during extended heavy use. The S70 also supports SLC caching, wear leveling, bad block management, over-provisioning, and TRIM for ongoing performance maintenance. With a rated endurance of 1,600 TBW (terabytes written) and a mean time between failures (MTBF) of 1.8 million hours, the S70 is engineered for longevity in sustained-use environments. A 5-year manufacturer warranty backs the drive. The M.2 2280 form factor (80 mm × 22 mm × 3.5 mm max height, 8.2 g) makes it compatible with thin-and-light notebooks and compact desktop builds. Power consumption is rated at 4.6 W during reads and 4.5 W during writes. Operating temperature range is 0°C to 70°C; storage temperature range is −40°C to 85°C. Addlink includes its SSD Toolbox software, which allows users to view drive information and firmware version, run health diagnostics, monitor S.M.A.R.T. status, and perform a secure erase. **Verified Specifications** - Capacity: 1 TB - Form Factor: M.2 2280 - Interface: PCIe Gen3 x4, NVMe 1.3 - Sequential Read: up to 3,400 MB/s - Sequential Write: up to 3,000 MB/s - 4K Random Read: up to 500,000 IOPS - 4K Random Write: up to 680,000 IOPS - DRAM Cache: DDR3L / DDR4L - TBW: 1,600 TBW - MTBF: 1.8 million hours - Power (R/W): 4.6 W / 4.5 W - Operating Temp: 0°C – 70°C - Storage Temp: −40°C – 85°C - Dimensions: 80 × 22 × 3.5 mm; 8.2 g - Warranty: 5 years - OS Support: Windows 10, Linux Kernel 2.6.31+; Windows 7/8 with additional driver