ANTEC C7 ARGB EATX Mid Tower Cabinet (Black)

The ANTEC C7 ARGB is a feature-rich EATX mid tower cabinet built for enthusiast PC builders who demand strong airflow, flexible cooling options, and clean aesthetics. The chassis is constructed from a combination of steel, plastic, and 4mm tempered glass, giving it a robust feel while keeping the interior showcase-ready. At the heart of the C7 ARGB's design is its vertical cooling architecture. Large venting areas around the lower chamber channel air from the bottom upward, while fine mesh panels on the top and right, combined with vents on the front, left, and lower chamber, enable multi-directional intake and exhaustive airflow through the entire system. The cabinet ships with four pre-installed ARGB PWM fans: three 120mm reverse fans mounted on the right side and one 140mm ARGB PWM fan at the rear. These can be controlled via the dedicated LED Control Button on the front I/O panel. Up to 10 fans can be installed in total across the top (3×120mm or 2×140mm), side (3×120mm), power supply shroud (3×120mm), and rear (1×120mm or 1×140mm) positions. Cooling flexibility extends to liquid cooling as well. The C7 ARGB supports radiators up to 360mm on the top and side, and up to 140mm at the rear. A removable cover on the PSU shroud allows side radiator installation up to 70mm in overall thickness; note that when a side radiator exceeds 52mm thickness, maximum GPU length is restricted to 280mm. With a standard-thickness side radiator of 52mm or less, there is no interference with full-length graphics cards up to 450mm. The front I/O panel provides a USB Type-C port at 10Gbps, two USB 3.0 ports, a combined headphone and microphone jack, a power button, and an LED control button. The seven fully reusable PCI slot covers can be repositioned 90 degrees to enable vertical GPU mounting (riser cable sold separately). Storage is handled through a flip-door compartment on the right side, accommodating up to two 3.5-inch HDDs or 2.5-inch SSDs and two additional 2.5-inch SSDs, with a bottom tray for one more 3.5-inch HDD or 2.5-inch SSD. Total drive capacity varies by motherboard form factor, with up to 3×3.5-inch or 5×2.5-inch drives supported under a standard configuration. Cable management is aided by 32mm of cable routing space behind the motherboard tray, four Velcro straps (two behind the motherboard, two at the rear), and a removable flip-door cable cover. Panel removal is tool-free across most of the chassis: the lower front and lower left mesh panels use hooks and magnets, while the front, both side panels, and top are secured by studs and hooks. Dust filtration covers the front and left side (magnetic filters) and the bottom (full-size pull-out filter). PSU installation is via a rear-pull mount with EVA cushion pads for vibration dampening. VERIFIED SPECIFICATIONS - Model: ANTEC C7 ARGB - Form Factor: Mid Tower - Dimensions: 485 × 241 × 504mm (D×W×H) - Materials: Steel, Plastic, 4mm Tempered Glass - Motherboard Support: E-ATX (≤272mm), ATX, M-ATX, ITX - Expansion Slots: 7 (reusable, vertical GPU-mount capable) - Included Fans: 3×120mm ARGB PWM reverse fans (right side) + 1×140mm ARGB PWM fan (rear) - Max Fan Support: Up to 10 fans total - Radiator Support: Top 120/140/240/280/360mm; Side 120/240/360mm; Rear 120/140mm - Max GPU Length: ≤450mm (≤280mm when side AIO >52mm) - Max CPU Cooler Height: ≤180mm - Max PSU Length (including cable): ≤210mm - Front I/O: Power button, LED Control, USB 3.0×2, USB Type-C 10Gbps×1, Headphone/Mic Combo - Dust Filters: Front (magnetic), Left side (magnetic), Bottom (pull-out) - Drive Bays (standard M/B): 3×3.5-inch/2.5-inch + 2×2.5-inch - Net Weight: 11.7 kg | Gross Weight: 14.2 kg - Warranty: 2 Years - GTIN: 0-761345-10135-6