ANTEC FLUX EATX Mid Tower Cabinet (White)

The Antec FLUX E-ATX Mid Tower Cabinet in White is built around Antec's F-LUX (Flow Luxury) Platform, a chassis architecture designed to establish multi-directional airflow throughout the case. Five pre-installed PWM fans — three 120mm fans at the front, one 120mm reverse-spin fan on the PSU shroud, and one 140mm fan at the rear — work together to move air through dedicated intake and exhaust channels. The front panel combines metal mesh with birch wood trim, a material pairing that sets this case apart visually while supporting strong front-to-rear ventilation. The recessed front panel design helps reduce wind noise and encourages smoother airflow. Air enters through the large-area front mesh (horizontal cooling path) and also through the PSU chamber at the bottom (vertical cooling path), a layout Antec calls Flux Vertical Cooling. This secondary intake route is positioned to direct fresh air toward the graphics card area, improving GPU thermal headroom. A removable top cooling bracket lets you mount fans or radiators outside the case before sliding the bracket back in, simplifying large-radiator installations. The FLUX supports simultaneous installation of a front 360mm radiator and a top 360mm radiator for users who want a full custom-loop or dual-AIO build. Alternatively, it accepts a front 420mm push-pull radiator paired with a top 280mm radiator for extreme cooling configurations. A rear 120/140mm radiator slot adds further flexibility. Motherboard compatibility spans ITX, Micro-ATX, ATX, and E-ATX boards up to 330mm wide. The fully-open PCI slot covers allow vertical GPU mounting when used with an optional vertical bracket. Back-connect motherboard compatibility is also supported, routing cables behind the tray for a cleaner interior view. The 4mm tempered glass side panel provides a clear view of the build. Storage options include two dedicated 2.5-inch bays plus two combo 3.5-inch/2.5-inch bays. Front I/O includes two USB 3.0 ports, one USB Type-C at 10 Gbps, and a headphone/microphone combo jack. A bottom dust filter helps keep intake debris manageable. Verifiable Specifications: - Form Factor: Mid Tower - Motherboard Support: ITX, M-ATX, ATX, E-ATX (up to 330mm) - Dimensions: 484 × 239 × 502 mm - Net Weight: 9.27 kg | Gross Weight: 10.64 kg - Included Fans: 3 × 120mm PWM (front) + 1 × 120mm PWM reverse (PSU shroud) + 1 × 140mm PWM (rear) - Fan Support — Top: 3 × 120mm or 2 × 140mm | Rear: 1 × 120mm or 1 × 140mm - Radiator Support — Front: up to 420mm | Top: up to 360mm | Rear: 120/140mm - Max GPU Length: ≤408mm | Max CPU Cooler Height: ≤180mm | Max PSU Length: ≤235mm (with HDD) - Side Panel: 4mm Tempered Glass - Drive Bays: 2 × 2.5-inch; 2 × 3.5-inch/2.5-inch combo; 7 expansion slots - Front I/O: USB 3.0 × 2, USB Type-C 10Gbps × 1, Headphone/Mic combo - Dust Filter: Bottom - Warranty: 2 Years