COOLER MASTER Elite 1000W 80+ Gold ATX 3.1 Fully Modular Power Supply ( 1000W )

The Cooler Master Elite Gold 1000 is a 1000-watt fully modular ATX power supply built for gaming PCs, high-performance workstations, and future-ready builds. It carries the 80 Plus Gold certification, delivering 90% or greater efficiency at typical loads, which helps lower running temperatures and reduces wasted energy during extended sessions. Compliance with the ATX 12V Version 3.1 standard means the Elite Gold 1000 is ready for today's most demanding graphics cards, including RTX 50-series GPUs that require the 12+4 pin PCIe Gen 5.1 connector — included here on a 600 mm cable. The unit supports peak transient power delivery up to 200% of rated output as required by the ATX 3.1 specification, ensuring stable performance during sudden GPU power spikes. Cooling is handled by a 120 mm Fluid Dynamic Bearing (FDB) fan, a design that resists wear and operates quietly over a long service life. The PSU is rated for continuous operation between 0°C and 40°C, making it suitable for cases with moderate airflow and demanding workloads such as 3D rendering or extended gaming sessions. The fully modular cable system uses flat, embossed black cables, allowing builders to connect only the cables they need for a tidier interior. A dual EPS 4+4 pin arrangement on two cables (each 700 mm) provides broad CPU compatibility, and six PCI-e 6+2 pin connectors across three cables (550+120 mm) support multi-GPU or high-wattage single-GPU configurations. Protection circuitry covers under-voltage (UVP), over-voltage (OVP), over-power (OPP), over-temperature (OTP), and short-circuit (SCP) events. The unit carries ErP 2014 Lot 3 compliance and holds certifications including cTUV us, CB, CE, FCC, BSMI, EAC, RCM, UKCA, RoHS 2.0, and REACH. Verified Specifications: - Model: MPW-A001-AFAG | Series: Elite Series - Wattage: 1000W | Form Factor: ATX - ATX Version: ATX 12V Ver. 3.1 | Modular: Fully Modular - Efficiency: ≥90% at typical load | Rating: 80 Plus Gold - PFC: Active | Input Voltage: 100–240V | Input Current: 6–12A - Input Frequency: 50–60Hz - Fan: 120mm FDB | Operating Temp: 0–40°C - MTBF: >100,000 hours @ 25°C ambient - Hold-Up Time: ≥16ms at 80% load | Power Good Signal: 100–150ms - Protections: UVP, OVP, OPP, OTP, SCP - Connectors: 1× ATX 24-pin (600mm), 2× EPS 4+4 pin (700mm), 1× 12+4 pin (600mm), 6× PCIe 6+2 pin on 3 cables (550+120mm), 9× SATA on 3 cables, 3× Peripheral 4-pin - Dimensions: 140 × 150 × 86 mm - Warranty: 10 Years