CORSAIR Vengeance 16GB ( 16GBX1 ) 5600MHz DDR5 RAM ( CL40 )

The Corsair Vengeance DDR5 16GB (1 x 16GB) module operates at 5600MHz (PC5-44800) with a CAS latency of CL40, delivering substantially higher clock speeds than standard DDR4 platforms. As a single DIMM configuration, it is well suited for system builders seeking a capable starting point with the option to add a second stick later for dual-channel operation. At its core, this module runs on the DDR5 standard, which integrates an die ECC layer and moves voltage regulation from the motherboard to the module itself via an board Power Management IC (PMIC). Corsair has equipped this stick with an Overclock PMIC, providing more headroom for stable higher-frequency operation compared to standard DDR5 modules using a basic PMIC. The aluminium heat spreader in a matte black finish assists thermal dissipation during extended sessions. XMP 3.0 support is included, enabling compatible Intel 600 Series motherboards to load the 5600MHz profile automatically through the BIOS. Without XMP enabled, the module defaults to JEDEC baseline speeds at 4800MHz and 1.1V — entirely normal DDR5 behaviour. At the rated XMP profile, tested voltage is 1.25V. The module uses a standard 288-pin DIMM form factor and is listed as compatible with Intel 600 Series platforms. Builders pairing this RAM with a Corsair system may also consider the Corsair iCUE Link H150i 360mm liquid cooler or a Corsair Vengeance 32GB DDR5 5600MHz stick if higher capacity is required from the outset. Verified Specifications: – Model: CMK16GX5M1B5600C40 – Memory Series: Vengeance DDR5 – Capacity: 16GB (1 x 16GB) – Memory Type: DDR5 – Speed (XMP): 5600MHz – Speed Rating: PC5-44800 – CAS Latency: CL40 – Tested Voltage: 1.25V – SPD Speed: 4800MHz – SPD Voltage: 1.1V – Form Factor: DIMM, 288-pin – Heat Spreader: Aluminium – Colour: Black – PMIC Type: Overclock PMIC – Performance Profile: XMP 3.0 – Fan Included: No – Compatibility: Intel 600 Series – Warranty: Limited Lifetime