DeepCool CL6600 ARGB ATX Mid Tower Case

The DeepCool CL6600 is an ATX mid-tower case engineered around a split-chamber layout that physically separates the radiator zone from the main component bay. This thermal partitioning creates independent airflow paths for heat-generating components, reducing cross-interference that conventional single-chamber designs cannot avoid. The case ships complete with a pre-installed 360mm ARGB liquid cooler and two FL12R SE ARGB reverse-blade fans mounted at the bottom, so builders can get a high-performance liquid-cooled system running straight out of the box. The exterior combines vertical front grille bars for natural ventilation with real-wood accent trim, blending organic material with a clean modern silhouette. A tempered glass side panel exposes the illuminated interior, while the raised top chamber organises cable routing and keeps the view inside uncluttered thanks to DeepCool’s short-tube radiator design. For builders who want to go beyond the included cooling, the CL6600 supports up to eight 120mm fans in total across all mounting positions. The top accepts three 120mm or two 140mm fans and can be configured in push-pull around the pre-installed radiator. The rear accommodates one 120mm or 140mm fan, and additional 140mm fans can be mounted at the front. Dust filters on the top and bottom help keep the interior clean over time. The case accommodates back-connect (rear-connector) ATX and Micro-ATX motherboards in addition to standard ATX, Micro-ATX, and Mini-ITX form factors. Seven expansion slots support multi-GPU or high-expansion builds, and the front I/O panel provides two USB 3.0 ports, one USB 3.2 Gen 2 Type-C port, and a combined audio/mic jack. Verified Specifications: – Form Factor: ATX, Micro-ATX, Mini-ITX (including rear-connector variants) – Pre-installed AIO radiator: 360mm (402 × 120 × 27 mm, aluminium) – Pump speed: 2500–3400 RPM ±10%, 4-pin PWM, 12 VDC, 0.29 A, 3.48 W – AIO fans: 120 × 120 × 25 mm, 500–2500 RPM ±10%, FDB bearing, up to 73.41 CFM, ≤35.63 dB(A), 4-pin PWM – Pre-installed bottom fans: 2 × FL12R SE ARGB 120mm (reverse-blade) – ARGB: 3-pin (+5V-D-G), 5 VDC – Max GPU length: 388 mm – Max CPU cooler height: 175 mm – Max PSU length: 160 mm – Drive bays: 2+1 × 3.5″ HDD, 1+1 × 2.5″ SSD – Expansion slots: 7 – Radiator support: Top 360mm (pre-installed), Rear 120mm – Fan support: Top 3×120mm / 2×140mm, Front 2×140mm, Rear 1×120mm / 1×140mm, Bottom 2×120mm (pre-installed) – Dust filters: Top, Bottom – Front I/O: USB 3.0 ×2, USB 3.2 Gen 2 Type-C ×1, Audio/Mic ×1 – Materials: ABS, SPCC steel, tempered glass – Warranty: 1 Year