EVGA SuperNova 750 GT 80+ Gold Fully Modular Power Supply (750 W)

The EVGA SuperNova 750 GT is a fully modular ATX power supply rated at 750 watts, designed for builders who want reliable, efficient power delivery in a compact chassis-friendly form factor. At just 150 mm in length and width, it fits comfortably in mid-tower and many compact cases without the cable clutter that comes with non-modular designs. Because every cable is detachable, you connect only what your build actually needs, keeping airflow clear and the interior tidy. Efficiency is certified to 80 PLUS Gold standards, meaning the unit operates at 90% efficiency or higher at typical loads on a 115V AC line, and 92% or higher on a 220–240V AC line. That translates directly to less wasted heat inside your case and lower electricity draw at the wall. All capacitors are Japanese-sourced, a specification associated with tighter tolerance and longer operational life. The rated mean time between failures (MTBF) is 100,000 hours. The SuperNova 750 GT uses EVGA’s ECO Intelligent Thermal Control System, which runs the 135 mm Fluid Dynamic Bearing fan at reduced or zero speed during low-to-medium load conditions. The result is noticeably quieter operation during everyday desktop tasks or light gaming, with the fan ramping up only when thermal headroom demands it. The Fluid Dynamic Bearing itself is specified for extended lifespan compared to sleeve-bearing alternatives. Protection circuitry includes Over Voltage Protection (OVP), Under Voltage Protection (UVP), Over Current Protection (OCP), Over Power Protection (OPP), Short Circuit Protection (SCP), and dual Over Temperature Protection (OTP) covering both the primary and secondary PCBs. Verified Specifications: – Rated Output: 750 W @ 50°C ambient – Efficiency: 80 PLUS Gold (≥90% at 115V; ≥92% at 220–240V) – Modular Type: Fully Modular – Fan: 135 mm Fluid Dynamic Bearing, ECO auto mode – +12V Rail: 62.5 A max / 750 W – +3.3V & +5V Combined: 130 W max / 20 A – -12V Rail: 0.3 A / 3.6 W – +5Vsb: 3 A / 15 W – Connectors: 1× 24-pin ATX, 2× 8-pin EPS (4+4), 4× 8-pin PCIe (6+2), 6× SATA, 3× 4-pin peripheral, 1× floppy – Input Voltage: 100–240V~, 60/50 Hz – Dimensions: 86 mm (H) × 150 mm (W) × 150 mm (L) – Gross Weight: 5.60 lbs – MTBF: 100,000 hours – Capacitors: 100% Japanese – Certifications: TUV, CB, CE, FCC, RCM, cTUVus, WEEE, RoHS; ErP Lot 3 2014 compliant – Warranty: 7 years