Fractal Design Epoch TG Light Tint ATX Mid Tower Case

The Fractal Design Epoch TG Light Tint is an ATX mid-tower PC case built around a clean, contemporary aesthetic and a practical airflow architecture. The mesh front panel, paired with a lightly tinted tempered glass side panel, gives the chassis an unobtrusive look that sits comfortably in any workspace or gaming station without demanding attention. Three Momentum 12 120 mm fans are included from the factory, each featuring liquid-crystal-polymer (LCP) blades and fluid dynamic bearings (FDB) for steady airflow with reduced noise over time. The fans are front-mounted, pulling fresh air through the mesh intake and exhausting warm air through the ventilated top panel and rear exhaust position. Builders working with high-performance hardware will appreciate the generous internal clearances. Graphics cards up to 372 mm long fit with the three front fans in place; if you choose to move to a front-mounted radiator instead, the maximum GPU length adjusts to 345 mm. CPU air coolers up to 170 mm tall are supported, covering most current tower coolers. Power supplies up to 255 mm long are accommodated when one HDD tray is installed, or up to 155 mm with two HDD trays populated. Liquid cooling flexibility is a standout trait of the Epoch TG. The front position accepts radiators up to 280 mm or 360 mm; the top accepts radiators up to 240 mm; and the rear supports a single 120 mm radiator. For air cooling, the case accommodates up to six 120 mm fans or four 140 mm fans across front, top, and rear positions. The top I/O panel provides a USB Type-C port running at 20 Gbps, a USB Type-A port at 5 Gbps, and a combined audio and microphone jack. Cable management is assisted by routing grommets and fixed cable straps, with 30 mm of space behind the motherboard tray. A pull-to-remove front panel and a sliding fabric-tab top panel allow tool-free access during builds and maintenance. Verified specifications: - Form factor: ATX Mid Tower - Supported motherboards: ATX, Micro-ATX, Mini-ITX - Expansion slots: 7 - Included fans: 3 × 120 mm Momentum 12 (FDB bearings, LCP blades) - Total fan mounts: 6 × 120 mm or 4 × 140 mm - Front radiator: up to 280/360 mm - Top radiator: up to 240 mm - Rear radiator: 120 mm - Max GPU length: 372 mm (with front fans); 345 mm (with front radiator) - Max CPU cooler height: 170 mm - Max PSU length: 255 mm (1 HDD tray) / 155 mm (2 HDD trays) - Storage: 2 × 3.5-inch HDD, 2 × 2.5-inch SSD - Front I/O: USB Type-C 20 Gbps, USB Type-A 5 Gbps, combined audio/mic jack - Cable routing space: 30 mm - Dust filter: PSU - Material: Steel, tempered glass - Color: Black - SKU: FD-C-EPO1A-02 - Warranty: 2 years