FRACTAL DESIGN Pop Air RGB ATX Mid Tower Cabinet

The Fractal Design Pop Air RGB is an ATX mid-tower PC cabinet that pairs a honeycomb-patterned front mesh panel with a tempered glass left side panel, giving your build both strong airflow and clear visual appeal. The front mesh acts as a dust filter while allowing high airflow directly to your components, and the right side panel is solid steel for a clean, finished rear profile. The Pop Air RGB ships with three Aspect 12 RGB fans pre-installed — two 120 mm units in the front and one 120 mm unit at the rear — and an integrated ARGB controller on the front I/O panel so you can manage lighting without a separate hub. The front supports radiators up to 280 mm; the top supports up to 240 mm (with a maximum RAM height of 46 mm); and the rear supports a single 120 mm radiator. Storage options are flexible: two ultra-versatile trays each accommodate a 3.5-inch and a 2.5-inch drive simultaneously, and a dedicated SSD bracket supports two additional 2.5-inch drives, giving you up to four dedicated 2.5-inch mounts and three combined 3.5/2.5-inch mounts. Two concealed 5.25-inch bays with a storage drawer and magnetic cover add further expansion possibilities. Seven expansion slots support multi-GPU or high-end add-in card configurations. Cable management is straightforward thanks to multiple tie-down points, two pre-mounted cable ties and generously sized pass-through holes — with 19 mm of cable routing space behind the motherboard tray. Captive thumbscrews on HDD brackets, SSD brackets and side panels make assembly and upgrades tool-light. The front I/O includes two USB 3.0 ports and an audio jack. A USB 3.1 Gen 2 Type-C module is available separately. PSUs up to 170 mm, GPUs up to 405 mm (with front fan mounted) and CPU coolers up to 170 mm are supported. Verified Specifications: • Form factor: ATX mid tower • Motherboard support: ATX, mATX, Mini-ITX • Dimensions (L×W×H): 473.5 × 215 × 454 mm | Net weight: 7.2 kg • Included fans: 2× Aspect 12 RGB (front, 120 mm) + 1× Aspect 12 RGB (rear, 120 mm) • Total fan mounts: 5× 120 mm or 4× 140 mm • Front radiator: up to 280 mm | Top radiator: up to 240 mm | Rear radiator: 120 mm • GPU clearance: 405 mm (front fan mounted) • CPU cooler clearance: 170 mm | PSU clearance: 170 mm • Drive bays: 4× 2.5-inch dedicated; 3× combined 3.5/2.5-inch; 2× 5.25-inch • Left side panel: tempered glass | Right side panel: solid steel • Dust filters: top (perforated plastic), PSU (nylon), front (perforated steel) • Front I/O: 2× USB 3.0, audio, ARGB controller • Expansion slots: 7 • Warranty: 2 years