The G.SKILL Ripjaws S5 32GB DDR5 desktop memory module (model F5-5200J4040A32GX1-RS5K) is a single-stick 32GB kit operating at a tested XMP speed of 5200MHz with primary timings of 40-40-40-83 at 1.10V. Built on the DDR5 standard, it defaults to 4800 MT/s at 1.10V under standard BIOS settings and reaches its rated 5200MHz speed when Intel XMP 3.0 is enabled in compatible motherboard firmware. This Ripjaws S5 module uses hand-screened memory ICs that have passed G.SKILL’s internal validation process, helping ensure a balanced combination of speed, stability, and broad platform compatibility. The module ships in a matte black aluminium heat spreader and measures just 33mm in height — a compact low-profile form factor well suited to small form factor builds or systems fitted with large tower CPU coolers where vertical clearance above the DIMM slot may be limited. As a single-channel, unbuffered, non-ECC module, it is designed for mainstream and enthusiast desktop platforms built around Intel Core processors. It is not dual-rank or registered, keeping it straightforward to install in any compatible DDR5 motherboard. Note that this kit carries Intel XMP 3.0 support only and does not include an AMD EXPO profile; AMD platform users should verify DOCP/A-XMP compatibility with their specific motherboard before purchase. G.SKILL recommends against mixing this kit with modules from different kits, as doing so may cause system instability. The module carries a Limited Lifetime Warranty from G.SKILL. Key Specifications: • Model: F5-5200J4040A32GX1-RS5K • Memory Type: DDR5 • Capacity: 32GB (1 x 32GB) • Channel: Single Channel • Tested Speed (XMP 3.0): 5200MHz • Tested Latency (XMP 3.0): CL40-40-40-83 • Tested Voltage (XMP 3.0): 1.10V • SPD Default Speed: 4800 MT/s • SPD Default Voltage: 1.10V • Form Factor: UDIMM (Unbuffered) • ECC: Non-ECC • Heat Spreader Height: 33mm (low-profile) • Colour: Matte Black • Fan Included: No • RGB: No • Overclock Profile: Intel XMP 3.0 • Warranty: Limited Lifetime
CORSAIR Vengeance RGB 32GB ( 32GBx1 ) 5200MHz DDR5 RAM (Black) ( CL40 )
₹43,295.00
TeamGroup T-Create Expert 32GB (2x16GB) 6000MHz CL38 DDR5 - Black
₹43,435.00
G.SKILL Ripjaws S5 32GB ( 32GBx1 ) 5200MHz DDR5 RAM (Black) ( CL40 )
₹41,850.00
G.SKILL Ripjaws S5 32GB single-stick DDR5 5200MHz CL40 desktop RAM (Black) with Intel XMP 3.0, 33mm low-profile aluminium heat spreader, and hand-screened ICs for stable high-speed performance
Out of stock
Additional information
| Model | F5-5200J4040A32GX1-RS5K |
|---|---|
| Features | Intel XMP 3.0 (Extreme Memory Profile) Ready |
| Channel Kit | Single Channel |
| Fan Included | No |
| Additional Notes | Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.Memory kits that are "Intel XMP 3.0 Ready" only include XMP, and memory kits that are "AMD EXPO Profile Ready" only include EXPO.Prior to enabling XMP or EXPO, memory kits will boot at default BIOS settings with compatible hardware.For memory kits with XMP or EXPO, enable XMP/EXPO/DOCP/A-XMP profile in BIOS to reach the rated potential XMP or EXPO overclock speed of the memory kit, subject to the use of compatible hardware.Reaching the rated XMP/EXPO overclock speed and system stability will depend on the compatibility and capability of the motherboard and CPU used.Usage in any manner inconsistent with manufacturer specifications, warnings, designs, or recommendations will result in lower speeds, system instability, or damage to the system or its components |
| Spd Speed (Default) | 4800 MT/s |
| Error Checking (Ecc) | Non-ECC |
| Registered/Unbuffered | Unbuffered |
| Spd Voltage (Default) | 1.10V |
| Tested Speed (Xmp/Expo) | 5200 MHz |
| Tested Latency (Xmp/Expo) | 40-40-40-83 |
| Tested Voltage (Xmp/Expo) | 1.10V |
| Memory Type | DDR5 |
| Warranty | Lifetime |
| Capacity | 32GB |
Reviews
There are no reviews yet.