HYTE Y60 ATX Mid Tower Cabinet (White)

The HYTE Y60 (model CS-HYTE-Y60-WW) is a dual-chamber mid-tower ATX case finished in Snow White. Its most striking feature is the 3-piece panoramic tempered glass enclosure that wraps three sides of the chassis, eliminating the traditional corner pillar so your entire build is visible from either side of your desk. Graphics cards are mounted exclusively in a vertical orientation, making the GPU a centrepiece of the build rather than hiding it behind the motherboard tray. A PCIe 4.0 x16 riser cable is included in the box, housed beneath a protective canopy shroud that also accommodates half-height PCIe expansion cards — giving you three full-height and seven half-height expansion slots in total. The antechamber construction physically separates cables and power components from the main thermal zone, helping keep the windowed side of the build clean and uncluttered. Cooling is handled via a “cold floor” layout: two pre-installed 120 mm Flow FE12 fans with fluid-dynamic bearings sit at the bottom, and one additional 120 mm Flow FE12 fan (also 1,300 RPM, fluid-dynamic) is mounted at the rear — three fans total are included. Additional fan positions support 2× 120/140 mm on the side and 3× 120 mm on the top. Radiator compatibility spans up to 360 mm on the top (up to 30 mm thick) and 280 mm on the side (up to 150 mm thick). CPU coolers up to 160 mm tall are supported; HYTE notes that air-cooler users should add two side intake fans (not included) for optimal airflow. The front I/O panel provides 2× USB 3.0, 1× USB 3.2 Gen 2 Type-C, and a combined audio/microphone jack. Dust filters cover the bottom, side, and top openings. The chassis has no built-in RGB lighting, keeping the aesthetic minimal. Storage mounts accommodate 2× 3.5-inch HDDs or up to 4× 2.5-inch SSDs. ATX power supplies up to 235 mm in length are supported. Verified Specifications: Model CS-HYTE-Y60-WW | Colour: White | Type: Dual Chamber Mid-Tower ATX | Volume: 60 L | Dimensions: 456 mm (L) × 285 mm (W) × 462 mm (H) | Weight: 9.6 kg | Materials: Tempered Glass, Steel, ABS | Motherboard: E-ATX, ATX, mATX, ITX | GPU Max: 375 mm length, 75 mm width | CPU Cooler Max: 160 mm | PSU Max: 235 mm | PCIe Riser: 4.0 × 16 (included) | Storage: 2× 3.5″ HDD or 4× 2.5″ SSD | Included Fans: 3× 120 mm Flow FE12 @ 1,300 RPM (fluid-dynamic bearing) | Front I/O: 2× USB 3.0, 1× USB 3.2 Gen 2 Type-C, 1× Audio/Mic | Dust Filters: Bottom, Side, Top | RGB: None | Warranty: 2 years