Hyte Y60 ATX Mid Tower Case

The HYTE Y60 is a dual-chamber ATX mid-tower PC cabinet finished in black, built around a distinctive 3-piece panoramic tempered glass design that eliminates corner pillars for an unobstructed view of your system from both the left and the right side. At 60 litres of internal volume, the Y60 offers generous room for high-end components while keeping an orderly layout through its antechamber construction, which routes cables and power hardware behind a dedicated partition away from your cooling and motherboard zones. A PCIe 4.0 x16 riser cable is included in the box, enabling vertical GPU mounting behind a purpose-built protective riser canopy — a shroud designed specifically for the Y60 that also accommodates half-height PCIe cards. Three Flow FE120 fans with fluid-dynamic bearings come pre-installed: two 120 mm units in the bottom intake positions and one 120 mm fan at the rear exhaust, all rated at 1300 RPM. The cold-floor cooling layout channels fresh air upward through lateral bottom vents, reducing thermal hotspots inside the chassis. Radiator support reaches up to 360 mm on the top mount (up to 30 mm thick) and up to 280 mm on the side mount (up to 150 mm thick), giving liquid-cooling builds significant flexibility. CPU coolers up to 160 mm tall are supported. Note that HYTE recommends adding two side intake fans (not included) when using an air cooler for optimal airflow. The front I/O panel provides two USB 3.0 Type-A ports, one USB 3.2 Gen 2 Type-C port, and an audio/mic combo jack. Dust filtration is covered by filters on the bottom, side, and top panels. Verified Specifications: - Model: CS-HYTE-Y60-B | Colour: Black - Form Factor: Dual-Chamber Mid-Tower | Volume: 60 L - Dimensions: 456 mm (L) × 285 mm (W) × 462 mm (H) | Weight: 9.6 kg - Motherboard Support: E-ATX, ATX, mATX, ITX - Materials: Tempered Glass, Steel, ABS - Pre-installed Fans: 3 × 120 mm Flow FE120 (1300 RPM, fluid-dynamic bearing) - Max Fan Support: 8 total — Side: 2 × 120/140 mm; Top: 3 × 120 mm; Rear: 1 × 120 mm; Bottom: 2 × 120/140 mm - Radiator Support: Side up to 280 mm / 150 mm thick; Top up to 360 mm / 30 mm thick; Rear 120 mm - Max GPU Length: 375 mm (60 mm width or less recommended) - Max PSU Length: 235 mm (ATX) - Max CPU Cooler Height: 160 mm - Storage: 2 × 3.5" HDD or 4 × 2.5" SSD - Expansion Slots: 7 + 3 half-height - PCIe Riser: 4.0 × 16 (included) - Front I/O: 2 × USB 3.0, 1 × USB 3.2 Gen 2 Type-C, Audio/Mic Jack - Dust Filters: Bottom, Side, Top - RGB Lighting: None - Warranty: 2 Years