Nzxt H9 Flow RGB 2025 Edition E-ATX White Mid Tower Case

The NZXT H9 Flow RGB 2025 Edition (SKU: CM-H92FW-R1) is a spacious white mid-tower built around a dual-chamber design that physically separates your main components from the PSU and drives. This separation improves airflow, simplifies thermal management, and keeps cable runs short and tidy. Panoramic wraparound tempered glass panels showcase every component from multiple angles, making it a strong choice for showcase or RGB-focused builds. Airflow is central to the H9 Flow's identity. SGCC steel perforated panels and ultra-fine mesh surfaces work together to channel fresh air through the chassis efficiently. Pre-installed fans include one F420 RGB Core single-frame fan unit positioned in the front-right chamber and one F120Q (CV) 3-pin DC fan in the rear — four fans total as shipped. The case supports up to nine 140mm fans across the top, front-right, and bottom positions, plus one 120mm fan at the rear, for a maximum of ten fans. Radiator support is equally generous: up to a 420mm unit fits on both the top and the front-right, with additional compatibility for 360mm, 280mm, 240mm, 140mm, and 120mm radiators. GPU clearance extends to 435mm, providing ample room for high-end triple-slot graphics cards. CPU coolers up to 165mm tall are supported. The PSU bay accepts units up to 200mm in length. Storage options include up to six 2.5-inch SSDs and two 3.5-inch HDDs. Seven expansion slots accommodate multi-GPU or add-in card configurations. The front I/O panel provides a USB 3.2 Type-A port, a USB 3.2 Gen 2×2 Type-C port, and a headset jack. Cable management is aided by extra-wide routing channels, built-in Velcro straps, and tie-down points throughout the chassis. The case is also Back-Connect Ready, with verified compatibility for ASUS BTF and MSI Project Zero rear-connecting motherboards, enabling a fully cable-free front view. Motherboard compatibility spans E-ATX, ATX, Micro-ATX, and Mini-ITX form factors. A bottom dust filter helps keep the interior clean over time. The case carries a 2-year warranty. Verified Specifications: - SKU: CM-H92FW-R1 - Color: White - Form Factor Support: E-ATX, ATX, M-ATX, M-ITX - Material: SGCC Steel, Tempered Glass - Pre-Installed Fans: 4 (1× F420 RGB Core front-right, 1× F120Q CV rear) - Max Fan Support: 10 (up to 9× 140mm + 1× 120mm rear) - Max Radiator Size: 420mm (top & front-right) - Max GPU Length: 435mm - Max CPU Cooler Height: 165mm - Max PSU Length: 200mm - Storage: 6× 2.5" SSD, 2× 3.5" HDD - Expansion Slots: 7 - Front I/O: USB 3.2 Type-A, USB 3.2 Gen 2×2 Type-C, Headset Jack - Dust Filter: Bottom - Warranty: 2 Years