SILVERSTONE SG13 ITX Mini Tower Cabinet (Pink) (SST-SG13P)

The SilverStone SG13 (SST-SG13P) is a compact Mini-ITX mini tower cabinet finished in pink, purpose-built for small form factor PC builders who want a capable chassis without sacrificing upgrade options. Its steel body pairs with a mesh or plastic front panel to balance structural rigidity with airflow, while the 11.5-litre internal volume keeps your desk footprint minimal. Despite its size, the SG13 accommodates full-length ATX power supplies up to 150 mm (140 mm recommended for optimal cable clearance), and discrete graphics cards up to 270 mm (10.6 inches) long with a width restriction of 129 mm (5.11 inches). The case supports Mini-DTX and Mini-ITX motherboards, making it straightforward to spec a mainstream or high-performance ITX platform. Cooling flexibility is a highlight: the front accommodates a single 120 mm or 140 mm fan or a same-sized AIO radiator. Installing a 140 mm radiator does require removing the upper drive cage, which also reduces maximum GPU clearance to approximately 236 mm minus radiator thickness — a trade-off worth noting at the planning stage. Oversized vents on the side and top panels assist passive and active airflow throughout the chassis. Storage options include one 3.5-inch drive bay (compatible with up to two 2.5-inch drives via an adapter) and one dedicated 2.5-inch bay, giving builders room for an SSD plus a mechanical drive. An elevated motherboard standoff accommodates rear-side components, adding practical compatibility with thicker PCBs and right-angle connectors. The front I/O panel on the USB 3.0 variant (SST-SG13P) provides two USB 3.0 Type-A ports, a 3.5 mm audio jack and a microphone jack. Two expansion slots are available for add-in cards. A 61 mm CPU cooler height restriction applies, so low-profile air coolers or a front-mounted AIO are the recommended thermal solutions. Verified Specifications: – Model: SST-SG13P (USB 3.0 version) – Form factor: Mini-ITX / Mini-DTX – Dimensions: 222 mm (W) × 181 mm (H) × 285 mm (D) — 11.5 litres – Material: Steel body, mesh or plastic front panel – Expansion slots: 2 – GPU clearance: Up to 270 mm long / 129 mm wide (236 mm with 140 mm AIO installed) – CPU cooler height limit: 61 mm – PSU compatibility: ATX PS2, max 150 mm (140 mm recommended) – Drive bays: 1× 3.5-inch (2× 2.5-inch compatible) + 1× 2.5-inch – Cooling: Front 1× 120 mm or 140 mm fan/radiator slot; side and top oversized vents – Front I/O: 2× USB 3.0, audio + MIC – Warranty: 1 year