GIGABYTE H510M-S2 DDR4 Intel Motherboard

The Gigabyte H510M-S2 is a Micro ATX motherboard built on the Intel H510 Express Chipset and designed for the LGA1200 socket. It supports Intel's 10th Generation Core i9, i7, i5, i3, Pentium, and Celeron processors, as well as 11th Generation Core i9, i7, and i5 processors, making it a versatile platform for a wide range of builds from entry-level productivity to capable everyday computing. Power delivery relies on a 6+2 phase digital VRM with low RDS MOSFETs and solid capacitors, paired with an 8-pin solid-pin ATX 12V power connector. This arrangement helps maintain stable voltage under CPU load and supports consistent performance across workloads. The board features two DDR4 DIMM slots in a dual-channel configuration supporting up to 64 GB of system memory (32 GB per slot). Memory speeds of up to DDR4 3200 MHz are supported when paired with 11th Gen processors, while 10th Gen Core i9/i7 CPUs top out at DDR4 2933 MHz, and 10th Gen i5/i3/Pentium/Celeron at DDR4 2666 MHz. XMP profiles are also supported. Storage is handled by a single M.2 connector (Socket 3, M key, supporting 2260/2280/22110 form factors via PCIe 3.0 x4/x2 or SATA) alongside four SATA 6 Gb/s ports. Expansion slots include one PCIe x16 slot (PCIe 4.0 with 11th Gen CPUs) and one PCIe x1 slot (PCIe 3.0). Networking is provided by a Realtek GbE LAN chip (1000/100 Mbit), and audio is handled by a Realtek HD Audio CODEC supporting 2/4/5.1/7.1-channel output. Onboard graphics output is available via a single D-Sub (VGA) port at up to 1920×1200 @ 60 Hz, dependent on CPU integrated graphics support. Connectivity on the rear I/O panel includes 2× USB 3.2 Gen 1, 4× USB 2.0/1.1, PS/2 keyboard and mouse ports, one RJ-45 LAN port, one D-Sub video output, and 3× audio jacks. Internal headers expand connectivity further with USB 3.2 Gen 1 and USB 2.0 headers, an RGB LED strip header, front panel audio, serial port, and a TPM header (compatible with GC-TPM2.0 SPI modules). Fan management is handled by Gigabyte's Smart Fan 6 system, with CPU and system fan headers each supporting PWM and DC modes as well as water-cooling pump connections up to 2A/12V (24W). Users can define up to 7 temperature/speed control points per fan curve and enable Fan Stop to allow fans to cease spinning below a user-set temperature threshold. The board ships with a licensed AMI UEFI BIOS (256 Mbit flash), supporting PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, and ACPI 5.0. Software utilities include Gigabyte APP Center, @BIOS, EasyTune, Game Boost, Fast Boot, Smart Backup, Q-Flash, and Xpress Install. Anti-sulfur resistor design helps protect onboard components against environmental sulfur compounds. Verified Specifications: - Socket: LGA1200 - Chipset: Intel H510 Express - Form Factor: Micro ATX, 244 mm × 210 mm - Memory: 2× DDR4 DIMM, dual-channel, up to 64 GB, DDR4 2133–3200 MHz (speed depends on CPU generation), XMP supported - Storage: 1× M.2 (PCIe 3.0 x4/x2 or SATA, up to 22110), 4× SATA 6 Gb/s - Expansion: 1× PCIe x16 (PCIe 4.0 with 11th Gen only), 1× PCIe x1 (PCIe 3.0) - USB: 4× USB 3.2 Gen 1, 6× USB 2.0/1.1 - LAN: Realtek GbE (1000/100 Mbit) - Audio: Realtek HD Audio CODEC, up to 7.1-channel - Display: 1× D-Sub (max 1920×1200 @ 60 Hz) - BIOS: AMI UEFI, 256 Mbit flash - Warranty: 3 Years