COOLER MASTER MasterLiquid Core ll 240 ARGB 240mm CPU Liquid Cooler ( White ) ( Core 2 )

The Cooler Master MasterLiquid Core II 240 ARGB (model MLW-D24M-A18PA-RW) is a 240mm all-in-one liquid CPU cooler finished in white, designed to balance quiet thermal performance with striking aesthetics. At the heart of the cooler sits the refined G9R dual-chamber pump, which separates the inlet and outlet chambers to reduce turbulence, promoting more consistent coolant flow while keeping pump noise at or below 25 dBA at maximum speed. The pump head is dressed in an infinity-mirror cover that reflects addressable RGB lighting for a layered visual effect without adding bulk to the overall footprint. Two 120mm fans (120 x 120 x 25 mm each) are mounted to the 277 x 119.2 x 27.2 mm aluminum radiator. These revamped fans spin between 650 and 1,750 RPM (±10%) via a 7-pin PWM + ARGB connector, delivering a maximum airflow of 120 m³/h (70.7 CFM) and a static pressure of 2 mmH₂O, with a rated noise ceiling of 30 dBA. Sleeve bearings give the fans an MTTF rating exceeding 160,000 hours, while the pump itself carries an MTTF of more than 50,000 hours. Both the pump and fans operate on 12 VDC, with the pump drawing 3.6 W and each fan drawing up to 2.76 W. Four hundred millimetres of tubing give enough slack to route the radiator in top, front, or rear mount positions without stressing the hose connections. Installation is further simplified by the inclusion of Cooler Master's Cryo-Fuze thermal paste, which is pre-bundled in the box so no separate compound purchase is needed. Socket compatibility spans a wide range of current and recent platforms. On the Intel side the cooler supports LGA 1851, 1700, 1200, 2066, 2011-v3, 2011, 1151, 1150, 1155, and 1156, including the LGA 1851 reinforced independent loading mechanism (R-ILM) design used by Intel Core Ultra 200 series processors. AMD builders can mount it on AM5 and AM4 sockets. ARGB lighting on both the pump cover and the fans is daisy-chainable and compatible with major motherboard RGB headers. Verifiable Specifications: • Part number: MLW-D24M-A18PA-RW • Radiator dimensions: 277 × 119.2 × 27.2 mm • Pump dimensions: 83 × 76.2 × 52.3 mm • Pump speed: 3,100 ± 300 RPM | Noise: ≤25 dBA | Connector: 3-pin | Voltage: 12 VDC | Power: 3.6 W • Fan speed: 650–1,750 RPM ±10% | Airflow: 120 m³/h (70.7 CFM) | Pressure: 2 mmH₂O | Noise: 30 dBA • Fan connector: 7-pin PWM + ARGB | Voltage: 12 VDC | Rated current: 0.23 A • Tubing length: 400 mm | Radiator material: Aluminum | Bearing: Sleeve • Pump MTTF: >50,000 hrs | Fan MTTF: >160,000 hrs • Warranty: 5 years