Cougar OmnyX ARGB ATX Mid Tower Case with Quad 160mm PWM Fans

The Cougar OmnyX ARGB ATX Mid Tower Case (SKU: CGR-2WA3B-RGB) is built around COUGAR's Omnidirectional Dynamic Flow System — a chassis architecture engineered to deliver equal thermal and aesthetic performance whether the case is oriented with the glass panel facing right, left, or center. A perfectly symmetrical front-to-rear layout means every orientation is a valid, fully functional configuration, not an afterthought. At the heart of the OmnyX's cooling story are four pre-installed 160mm ARGB PWM fans — two forward-blade units at the front drawing cool air in, and two reverse-blade units at the rear exhausting hot air out. This mirrored arrangement creates a direct, uninterrupted jetstream path across your components. The case supports a maximum of seven fans in total, with additional mounts on the motherboard side. Fan speed ranges from 300 to 1,200 RPM (±10%), and all fans connect via a 5V 3-pin ARGB header and a standard 4-pin PWM header. An integrated universal fan hub handles PWM speed control and ARGB lighting coordination without requiring third-party software or motherboard synchronisation. For builders who prefer liquid cooling, the OmnyX accommodates radiators up to 360mm on the motherboard side and up to 280mm at both front and rear positions, with compatibility down to 120mm across all mounts. GPU accommodation is generous: the chassis accepts graphics cards up to 380mm in length, which can be vertically mounted without a bracket. Vertical mounting naturally aligns the GPU with gravity, reducing stress on the PCIe slot from the card's own weight. CPU coolers up to 170mm tall are supported, and the case fits ATX, Micro-ATX, and Mini-ITX motherboards including those with reverse-connector layouts. Cable management is handled by an integrated base compartment that routes all cabling out of the main chamber from the start of the build, keeping the interior clean with no additional effort. Quick-release covers and a magnetic dust filter panel simplify access during maintenance. Dust filters are present at the front, rear, and right panel positions. The sliding-rail IO module can be repositioned to either side of the case, expanding the accessible port array to 4× USB 3.0 Type-A and 2× USB 3.2 Gen 2 Type-C, alongside a combined audio jack and an ARGB control button. Detachable fan brackets, SSD/HDD bracket, and PSU bracket further simplify initial assembly. Verified Specifications: - Form Factor: ATX / Micro-ATX / Mini-ITX - Pre-installed Fans: 4× 160mm ARGB PWM (2 front forward-blade, 2 rear reverse-blade) - Max Fan Support: 7 total - Fan Speed: 300–1,200 RPM ±10% - Fan Connectors: 5V 3-pin ARGB / 4-pin PWM - Max GPU Length: 380mm - Max CPU Cooler Height: 170mm - Max PSU Length: 200mm - Radiator Support: Front 280mm / Motherboard Side 360mm / Rear 280mm (down to 120mm) - Expansion Slots: 7 - Storage: 2× 2.5" SSD, 2× 3.5" HDD - I/O: 4× USB 3.0 Type-A, 2× USB 3.2 Gen 2 Type-C, Audio Jack, ARGB Button - Dust Filters: Front, Rear, Right - Color: Black - Warranty: 1 Year