ARCTIC Liquid Freezer III Pro 360mm ARGB CPU Liquid Cooler ( White )

The ARCTIC Liquid Freezer III Pro 360mm ARGB (model ACFRE00188A) is a white all-in-one liquid CPU cooler built for high-performance systems that demand both effective thermal management and customisable aesthetics. At the heart of the cooling loop sits a 360mm aluminium radiator measuring 398 × 120 × 38 mm, whose 38 mm thickness provides increased liquid volume and greater surface area for heat dissipation compared with thinner radiator designs. Three P12 Pro A-RGB fans are pre-installed in a push configuration. Each 120 mm fan spins between 600 and 3000 RPM via PWM control, delivers up to 77 CFM of airflow, and generates up to 6.9 mmH₂O of static pressure — figures that help move air effectively through the dense radiator fins. The fans use fluid dynamic bearings and a seven-blade design to balance high static pressure against vibration and noise. A built-in 40 mm PWM VRM fan (400–2500 RPM) actively cools the voltage regulator module area, a feature less common in consumer AIO coolers. The pump operates between 800 and 2800 RPM under PWM control and draws 0.35 A at 12 V DC. The cold plate is machined copper with micro-skived fins for efficient heat transfer, and an offset mount shifts it toward known CPU hotspot zones. An Intel Contact Frame accessory is included to optimise contact pressure on compatible Intel sockets. Cabling is routed inside the 450 mm EPDM tubes (outer diameter 12.4 mm, inner 6.0 mm), which are braided for durability and leak resistance. Fan cables are sleeved within the tube covering to simplify installation and reduce clutter in the case. The unit includes 0.8 g of MX-6 thermal paste pre-applied in a cross pattern. Minimum case clearance required is 63 mm. Aesthetics are served by 12 A-RGB Gen2 LEDs per fan, driven via a 3-pin A-RGB (+5 V/DATA/GND) daisy-chain connector (3-pin plug and socket). The white radiator and pump head deliver a clean, cohesive look suited to light-themed builds. Verified Specifications: Model: ACFRE00188A | Radiator: 398 × 120 × 38 mm aluminium | Fans: 3× P12 Pro A-RGB, 120 mm, 600–3000 RPM, 77 CFM, 6.9 mmH₂O, fluid dynamic bearing | VRM Fan: 40 mm, 400–2500 RPM | Pump: 800–2800 RPM PWM, 0.35 A / 12 V DC | Cold plate: copper micro-skived | Tubes: 450 mm EPDM, OD 12.4 mm / ID 6.0 mm | TIM: MX-6 0.8 g | ARGB: 12× A-RGB Gen2 LEDs per fan, 0.40 A / 5 V DC | Sockets: Intel LGA1851, LGA1700; AMD AM5, AM4 | Operating temp: 0–40 °C | Weight: 2005 g (unit), 2.45 kg (packaged) | Warranty: 6 years