Corsair Warthog RS E-ATX Mid Tower Case

The Corsair Warthog RS is a ruggedized, modular E-ATX mid tower case engineered for PC builders who demand strong airflow, flexible building options, and lasting durability. Built from thick steel with slide-on tempered glass side panels, the chassis delivers a purposeful, carry-anywhere feel reinforced by top-mounted integrated carry handles structurally built into the frame. Cooling is a central focus. The front and top panels use Corsair's 3D Y-pattern design, which increases airflow by 12.7% compared to standard flat cutouts, creating a low-obstruction path for cool air intake. The case ships with three pre-installed fans: two RS200 200mm PWM fans at the front as intakes and one RS120 120mm PWM fan at the rear for exhaust. All fans support daisy-chain connections via standard 4-pin PWM headers and offer a Zero RPM mode for near-silent operation at low loads. They are also compatible with fan controllers such as the Corsair Commander Duo. The Corsair InfiniRail Fan Mounting System gives builders exceptional placement freedom, allowing fans up to 200mm in the front and up to 140mm in the roof to be slid into precise positions without fixed mounting constraints. Dual 360mm radiator support spans three locations — front, roof, and side — and the case can accommodate up to 13 fans simultaneously. Building inside the Warthog RS is made easier by RapidRoute 2.0, a pegboard-style motherboard tray with customisable tie-down points, six cinching straps, two wire loom pairs, and increased spacing behind the tray for clean cable routing. The case is validated for reverse-connector motherboards including ASUS BTF, MSI Project Zero, and Gigabyte Project Stealth, with extensive cutouts and tie-downs. Front I/O includes two USB 3.2 Gen 1 Type-A ports and one USB 3.2 Gen 2x2 Type-C port. Storage support accommodates one 3.5-inch HDD or up to two 2.5-inch SSDs via the included removable drive tray. A built-in GPU Anti-sag Stabilisation Arm keeps heavy graphics cards properly supported. Rear I/O lighting makes cable connections easier in low-light environments. Verified Specifications: - Form Factor: E-ATX, ATX, Micro-ATX, Mini-ITX - Colour: Black | Material: Steel, Tempered Glass - Pre-installed Fans: 3 (2× RS200 200mm front intake, 1× RS120 120mm rear exhaust) - Max Fan Support: 13× 120mm simultaneously - Radiator Support: Front / Top / Side — 360mm, 280mm, 240mm; Rear — 120mm, 140mm - Max GPU Length: 405mm (with fan) - Max CPU Cooler Height: 190mm - Max PSU Length: 200mm - Front I/O: 2× USB 3.2 Gen 1 Type-A, 1× USB 3.2 Gen 2x2 Type-C, HD audio combo jack - Storage: 1× 3.5" HDD or 2× 2.5" SSD - Expansion Slots: 7 + 3 - Dust Filters: Front, Bottom, Side - Warranty: 2 Years - SKU: CC-9011351-WW