LIAN LI Q58X4 ITX Mini Tower Cabinet With PCIe 4.0 Riser Cable (Black)

The Lian Li Q58X4 is a compact Mini-ITX tower cabinet engineered for enthusiasts who refuse to sacrifice build quality or cooling flexibility in a small form factor. The exterior is machined from aluminium, giving the chassis a premium feel and solid rigidity, while the interior frame uses SPCC steel for structural integrity. The case measures 342 mm (D) × 170 mm (W) × 250 mm (H), keeping your build genuinely desk-friendly without cramping your component choices. One of the Q58X4’s standout design decisions is its dual-side split hinged panel system. Each side carries one 3.0 mm thick tempered glass panel and one 1.0 mm fine mesh panel; the two panel types are swappable so you can favour airflow or showcase your build on demand. The hinged glass panel includes a curved rear cutout that lets you swing it open without first removing a thumbscrew, a thoughtful detail that reduces the risk of knocking the glass against your desk. A PCIe 4.0 x16 riser cable is included in the box, allowing you to vertically mount a GPU up to three slots thick and up to 320 mm long. The vertical orientation puts your graphics card on full display through the glass panel. The Q58X4 supports SFX, SFX-L, and ATX power supplies. An included bracket converts the chassis between SFX and ATX PSU modes. In SFX PSU configuration, the case can accommodate a 240 mm AIO radiator at the top alongside a 120 mm unit at the bottom; top fan positions accept 2× 120 mm or 2× 140 mm fans, and the bottom accepts 1× 120 mm fan. Storage is handled by up to four drive mounting locations. You can fit 4× 2.5-inch SSDs, or a combination of 3× 2.5-inch SSDs and 1× 3.5-inch HDD. An exclusively designed toolless hot-swap SSD tray sits at the front-top of the case; open the top and front panel and you can remove or swap an SSD without touching a single cable. Cable management is assisted by multiple Velcro straps, cable tie-down points, and a built-in LED/fan hub hidden behind the rear Lian Li logo plate. The hub supports 3× PWM fan headers and 3× 5 V 3-pin ARGB LED headers. Two magnetic dust filters, fitted at the bottom and at the mesh panel, reduce dust ingress. Front I/O includes 1× USB 3.0, 1× USB 3.1 Type-C, and 1× HD Audio. Verified Specifications: • Dimensions: 342 mm (D) × 170 mm (W) × 250 mm (H) • Motherboard Support: Mini-ITX • Materials: Aluminium exterior, SPCC steel interior, 3.0 mm black tempered glass panels • Fan Support: Top 2× 120 mm or 2× 140 mm; Bottom 1× 120 mm • Radiator Support: Top 1× 120 mm or 240 mm; Bottom 1× 120 mm • PSU Support: SFX / SFX-L / ATX • GPU Length Clearance: Max 320 mm • CPU Cooler Clearance: Max 70 mm • Drive Bays: Up to 4× 2.5-inch, or 3× 2.5-inch + 1× 3.5-inch • Expansion Slots: 3 • I/O Ports: 1× USB 3.0, 1× USB 3.1 Type-C, 1× HD Audio • Warranty: 1 year