Nzxt H6 Flow White ATX Mid Tower Case

The NZXT H6 Flow White (CC-H61FW-01) is a compact ATX mid-tower case built around an innovative dual-chamber layout that physically separates the motherboard compartment from the power supply and cable routing areas. This separation improves overall thermal efficiency by allowing cooler air to flow directly over heat-generating components without being impeded by cabling clutter. Wraparound ultra-clear tempered glass panels on two sides provide an unobstructed view of the interior, letting your components take centre stage. The front-right fan bracket ships with three pre-installed 120mm F120Q airflow fans angled to push fresh air across the GPU and CPU zones from the moment you power Each F120Q fan operates at up to 1,200 RPM (±240 RPM), delivering 62.18 CFM of airflow at a noise level of 25.1 dBA, striking a practical balance between cooling performance and acoustic comfort. Airflow is further enhanced by a perforation pattern on the top and side panels, combined with a high-performance mesh dust filter on the top to keep particulates out of the system. The top panel accommodates radiators up to 360mm, while the rear supports a single 120mm radiator or fan, giving builders meaningful liquid-cooling flexibility without needing a full-tower chassis. Cable management is handled through wide routing channels and included straps that route cables behind the motherboard tray, keeping the glass-facing side clean. A generous 91mm of cable management depth at the rear of the tray accommodates thick custom-sleeved cable kits. Tool-free access to the top and side panels speeds up upgrades and routine maintenance. The H6 Flow White supports ATX, Micro-ATX, and Mini-ITX motherboards, accommodates CPU coolers up to 163mm tall, graphics cards up to 365mm long, and power supplies up to 200mm in length — broad compatibility for a wide range of component choices. — Verified Specifications — Model: CC-H61FW-01 | Brand: NZXT | Color: White Form Factor: Mid-Tower | Motherboard Support: ATX, Micro-ATX, Mini-ITX Case Material: SGCC Steel, Ultra-Clear Tempered Glass Dimensions (H×W×D): 435 × 287 × 415 mm (17.13 × 11.3 × 16.34 in) Weight: 9.4 kg Pre-installed Fans: 3 × F120Q 120mm (front-right) | Fan Speed: 1,200 ±240 RPM | Airflow: 62.18 CFM | Noise: 25.1 dBA | Connector: 3-pin Fan Support: Front-Right 3×120mm, Top 3×120mm or 2×140mm, Bottom 2×140mm, Rear 1×120mm (max 9 fans) Radiator Support: Top up to 360mm, Rear up to 120mm CPU Cooler Clearance: 163mm | GPU Clearance: 365mm | PSU Clearance: 200mm Drive Bays: 2× 2.5" SSD, 1× 3.5" HDD Front I/O: 2× USB 3.2 Gen 1 Type-A, 1× USB 3.2 Gen 2 Type-C, 1× Headset Audio Jack Expansion Slots: 7 standard, 0 vertical Dust Filters: Top (high-performance mesh) Warranty: 2 Years