NZXT H9 Flow RGB 2025 Edition EATX Mid Tower Cabinet (White)

The NZXT H9 Flow RGB 2025 Edition (model CM-H92FW-R1) is a spacious dual-chamber mid-tower cabinet finished in white, constructed from SGCC steel and tempered glass. Its defining feature is a dual-chamber layout that physically separates the primary components — motherboard, GPU, and CPU cooler — from the power supply and storage drives. This separation reduces heat recirculation and simplifies cable routing, keeping the visible build area clean and thermally efficient. Airflow is channelled through ultra-fine mesh panels positioned across the front-right and other intake surfaces. Four fans come pre-installed: an F420 RGB Core single-frame fan unit at the front-right and an F120Q CV (3-pin DC) fan at the rear, with capacity to expand to ten fans in total — up to nine 140mm fans across the top, front-right, and bottom positions, plus one 120mm fan at the rear. Liquid cooling is equally well catered for, with support for radiators up to 420mm on both the top and front-right mounts, as well as 360mm, 280mm, 240mm, 140mm, and 120mm configurations. The wraparound tempered glass panels provide a panoramic view of the interior, making it an ideal showcase for RGB builds. GPU clearance reaches 435mm, accommodating high-end triple-slot graphics cards. CPU coolers up to 165mm tall fit without conflict, and the PSU bay accepts units up to 200mm in length. The cabinet supports E-ATX, ATX, Micro-ATX, and Mini-ITX motherboards across seven expansion slots. Storage provisions include two 3.5-inch HDD bays and six 2.5-inch SSD mounts. Cable management is assisted by extra-wide routing channels, integrated Velcro straps, and multiple tie-down points. A bottom dust filter helps manage particulate ingress. The front I/O panel includes a USB 3.2 Type-A port, a USB 3.2 Gen 2x2 Type-C port, and a headset jack. The cabinet is also back-connect ready, supporting rear-connecting motherboard platforms such as ASUS BTF and MSI Project Zero for a virtually cable-free aesthetic. Key Verified Specifications: - Model: CM-H92FW-R1 - Form factor: Mid-Tower - Motherboard support: E-ATX, ATX, Micro-ATX, Mini-ITX - Material: SGCC Steel, Tempered Glass - Pre-installed fans: 4 (1× F420 RGB Core front-right, 1× F120Q CV rear; note: source lists 4 pre-installed in spec table) - Max fan support: 10 (up to nine 140mm + one 120mm) - Radiator support: 420mm, 360mm, 280mm, 240mm, 140mm, 120mm - Max GPU length: 435mm - Max CPU cooler height: 165mm - Max PSU length: 200mm - Expansion slots: 7 - Storage: 2× 3.5-inch HDD, 6× 2.5-inch SSD - Front I/O: USB 3.2 Type-A, USB 3.2 Gen 2x2 Type-C, Headset Jack - Dust filter: Bottom - Colour: White - Warranty: 2 Years