TAG Gamerz Pulser ARGB MATX Mid Tower Cabinet (White)

The TAG Gamerz Pulser ARGB MATX Mid Tower Cabinet in White is a compact, feature-rich gaming enclosure built around a 3D angular fine-mesh front panel that channels air directly to your core components. Four 120mm ARGB fans come pre-installed — three at the front intake and one at the rear exhaust — delivering consistent positive airflow across the CPU, GPU, and storage bays from the moment you power Each fan supports 16.8 million colour options and can be controlled through your motherboard’s ARGB software header or via the dedicated LED control button on the front I/O panel. Access to the interior is handled by a swing-door tempered glass side panel (4mm, magnetic lock) that opens on a hinge rather than sliding off, making component swaps and cable management significantly faster. Magnetic dust filters on the top and bottom keep particulates away from sensitive hardware, while the tool-free drive bays reduce the time spent during assembly. The chassis supports Micro-ATX and Mini-ITX motherboards, leaving room for a variety of compact to mid-range builds. GPU clearance extends to 310mm, covering most current-generation graphics cards, while CPU air cooler height is capped at 159mm — adequate for most dual-tower coolers. PSU length (including cables) must not exceed 180mm, so modular or short-cable units are recommended. Liquid cooling is well catered for: the front accepts up to a 240mm radiator and the top supports up to a 240mm radiator, with the top-mounted position leaving full-size RAM slots unobstructed. Storage options include two 3.5-inch HDD bays (with a removable bracket), one convertible 2.5-inch/3.5-inch bay, and three dedicated 2.5-inch SSD mounts. Four PCIe expansion slots accommodate multi-card or vertical GPU configurations. Verified Specifications: • Dimensions: 365 mm (L) × 200 mm (W) × 426 mm (H) • Form factor: Mid Tower • Supported motherboards: Micro-ATX, Mini-ITX • Materials: SPCC 0.5 mm steel / ABS plastic / 4 mm tempered glass • Pre-installed fans: 3 × 120mm ARGB (front) + 1 × 120mm ARGB (rear) • Total fan support: front 3 × 120mm or 2 × 140mm; top 2 × 120mm; rear 1 × 120mm (up to 6 fans total) • Radiator support: front up to 240mm, top up to 240mm, rear 120mm • Max GPU length: ≤ 310mm • Max CPU cooler height: ≤ 159mm • Max PSU length (incl. cable): ≤ 180mm • Drive bays: 2 × 3.5-inch HDD, 1 × convertible 3.5/2.5-inch, 3 × 2.5-inch SSD • Expansion slots: 4 • Front I/O: 1 × USB 3.0 (5 Gbps), 2 × USB 2.0 (480 Mbps), 3.5mm headphone/mic combo, ARGB control button, power button, reset button • Warranty: 1 Year • SKU: TG-C-Pulser-W