Thermaltake UX200 SE ARGB Lighting CPU Air Cooler (White)

The Thermaltake UX200 SE ARGB Lighting CPU Air Cooler in White is a single-tower air cooler built around four Φ6 mm U-shaped copper heat pipes that draw heat away from the CPU base plate and dissipate it through an aluminium fin stack. A single 120 mm PWM fan mounts directly to the tower and adjusts its speed automatically between 800 and 1800 RPM depending on thermal load, delivering up to 62.72 CFM of airflow at a static pressure of 1.47 mm-H₂O while remaining at or below 25.0 dBA under typical operating conditions. The fan uses a hydraulic bearing with a self-lubricating mechanism and a sealed cap to reduce friction, minimise operational noise, and extend service life; the rated fan lifespan is 30,000 hours. The cooler carries a 170 W TDP rating, making it suitable for mainstream and mid-range processors across both major CPU platforms. A universal all-in-one backplate simplifies installation and supports Intel LGA 1700, 1200, 1156, 1155, 1151, and 1150 sockets as well as AMD AM5, AM4, FM2, FM1, AM3+, AM3, AM2+, and AM2 sockets. The white colourway extends to both the fan frame and the heatsink shroud, complementing white-themed builds. Fifteen addressable RGB LEDs are embedded in the fan and connect via a 5 V 3-pin ARGB header, offering compatibility with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome RGB software for unified lighting control through the motherboard without additional controllers. The overall cooler dimensions are 122 × 61 × 156.2 mm (L × W × H), fitting most standard mid-tower and full-tower chassis with adequate CPU cooler clearance. Thermaltake backs the UX200 SE with a 2-year warranty. Verified Specifications: Model — UX200 SE (P/N CL-P116-AL12SW-A) | Heatsink Material — Aluminium fins, copper heat pipes | Heat Pipes — Φ6 mm × 4 | Cooler Dimensions — 122 × 61 × 156.2 mm | Fan Dimensions — 120 × 120 × 25 mm | Fan Speed — 800–1800 RPM (PWM) | Airflow — 62.72 CFM | Static Pressure — 1.47 mm-H₂O | Noise Level — 25.0 dBA | TDP — 170 W | Fan Power — 4.32 W (12 V, 0.3 A) | Fan Start Voltage — 6.0 V | ARGB Connection — 5 V 3-pin header | Fan Life — 30,000 hours | Warranty — 2 Years