Cooler Master MasterBox MB600L V2 ATX Mid Tower Case

The Cooler Master MasterBox MB600L V2 (model MB600L2-KNNN-S00) is a well-rounded ATX mid tower chassis designed to accommodate a wide range of builds without sacrificing airflow or aesthetics. Its brushed front panel gives the exterior a clean, understated look, while large mesh intakes on either side of the front panel allow air to flow freely into the system. At the centre of the front panel sits the distinctive Cooler Master hexagon accent, which can catch and emit a glow when an optional RGB or ARGB fan is installed behind it — though no RGB fans are included in the box. Inside, the case supports Mini-ITX, Micro-ATX, and full ATX motherboards across seven expansion slots. A removable hard drive cage gives builders the flexibility to free up space for longer power supplies or to reduce cable clutter, while 18.5 mm of cable-routing clearance behind the motherboard tray helps keep the interior tidy. The ventilated PSU shroud allows bottom-mounted ATX power supplies to be oriented with the fan facing either upward or downward, accommodating both actively and passively cooled units. Cooling flexibility is a standout attribute. The front panel accepts up to three 120 mm or two 140 mm fans and can mount radiators ranging from 120 mm up to 360 mm. The top supports two 120 mm or 140 mm fans and radiators up to 240 mm (note: RAM height must not exceed 32 mm when a top radiator is fitted, and RAM should be installed before the radiator). A single 120 mm fan position and 120 mm radiator slot are available at the rear, where a 120 mm fan comes pre-installed. The total supported fan count is six. Dust filters are positioned at the front, top, and bottom to reduce maintenance intervals. Graphics cards up to 350 mm in length fit without front fans or a radiator installed; CPU coolers up to 161 mm tall are also supported. Storage options include two combo 2.5-inch/3.5-inch bays and two dedicated 2.5-inch bays, giving room for a pair of SSDs alongside hard drives. The front I/O panel provides two USB 3.2 Gen 1 Type-A ports and a 3.5 mm combined audio and microphone jack. Verified Specifications: • Model: MB600L2-KNNN-S00 • Form Factor: Mid Tower • Motherboard Support: Mini-ITX, Micro-ATX, ATX • Dimensions (L×W×H): 405.5 × 204 × 455.3 mm (incl. protrusions) • Internal Volume: 37.15 L (excl. protrusions) • Expansion Slots: 7 • Pre-installed Fan: 1× 120 mm rear • Max Fan Support: 6 total • Front Radiator Support: 120 / 140 / 240 / 280 / 360 mm • Top Radiator Support: 120 / 240 mm (≤32 mm RAM height) • Rear Radiator Support: 120 mm • Max GPU Length: 350 mm (without front fans/radiator) • Max CPU Cooler Height: 161 mm • Max PSU Length: 160 mm • Drive Bays: 2× combo 2.5"/3.5", 2× 2.5" • I/O: 2× USB 3.2 Gen 1 Type-A, 1× 3.5 mm headset jack • Dust Filters: Front, Top, Bottom • Materials: Steel, Plastic • Colour: Black • Warranty: 2 Years