GIGABYTE H470M H DDR4 Intel Motherboard
MPN GIGABYTE-H470M-H · Brand Gigabyte · mATX
The Gigabyte H470M H DDR4 is a Micro ATX LGA1200 motherboard featuring the Intel H470 chipset, dual-channel DDR4 memory support up to 64 GB, PCIe 3.0 M.2 NVMe storage, and Gigabyte Smart Fan 5 cooling control — compatible with Intel 10th and 11th Generation processors
Inclusive of GST · GST invoice available
Overview
The Gigabyte H470M H is a Micro ATX motherboard built around the Intel H470 Express Chipset, designed for LGA1200 socket processors. It supports Intel 10th and 11th Generation Core i9, i7, i5, i3, Pentium, and Celeron processors, making it a versatile platform for mainstream desktop builds. The board measures 22.6 cm x 18.5 cm, fitting a wide range of mid-tower and compact cases. Memory support is handled by two DDR4 DIMM slots in a dual-channel configuration, accommodating up to 64 GB of system memory (32 GB per DIMM). With 11th Generation processors, speeds up to DDR4 3200 MT/s are supported, while 10th Generation i9/i7 CPUs top out at 2933 MT/s. XMP memory profiles are also supported. For storage, the board provides one M.2 Socket 3 connector (M key, 2280) supporting both SATA and PCIe 3.0 x4/x2 NVMe SSDs, alongside four SATA 6 Gb/s ports. RAID 0, 1, 5, and 10 configurations are supported via the chipset, and the board is Intel Optane Memory Ready. Expansion is covered by one PCIe 3.0 x16 slot (CPU-connected) and one PCIe 3.0 x1 slot (chipset-connected). USB connectivity includes four USB 3.2 Gen 1 ports and six USB 2.0/1.1 ports, distributed between the back panel and internal headers. Onboard graphics output is provided through one D-Sub port (up to 1920x1200 @ 60 Hz, 10th Gen only) and one HDMI 1.4 port (up to 4096x2160 @ 30 Hz). Audio is handled by a Realtek High Definition Audio CODEC supporting 2/4/5.1/7.1-channel output. Networking uses a Realtek Gigabit Ethernet LAN chip (1 Gbps/100 Mbps) with bundled bandwidth management software. The board features Gigabyte's Smart Fan 5 system, which allows fan headers to be mapped to different thermal sensors and supports both PWM and voltage-mode fans. Hardware monitoring covers voltage, temperature, fan speed detection, and fan fail warning. Protection features include an anti-surge IC, anti-sulfur resistor design, Glass Fabric PCB for humidity resistance, and Low RDS MOSFETs for thermal efficiency. The BIOS uses a licensed AMI UEFI implementation with Q-Flash support for easy firmware updates. Verified Specifications: Socket: LGA1200 | Chipset: Intel H470 Express | Form Factor: Micro ATX (22.6 cm x 18.5 cm) | Memory: 2x DDR4 DIMM, up to 64 GB, dual-channel | Storage: 1x M.2 2280 PCIe 3.0 x4 + 4x SATA 6 Gb/s | GPU Slot: 1x PCIe 3.0 x16 | USB: 4x USB 3.2 Gen 1, 6x USB 2.0 | LAN: Realtek GbE (1 Gbps) | Audio: Realtek HD Audio, up to 7.1-channel | Display Out: 1x HDMI 1.4, 1x D-Sub | OS: Windows 10/11 64-bit
Datasheet
| Form Factor | mATX |
|---|---|
| Chipset | Intel® H470 Express Chipset |
| CPU Type | |
| Lan | Realtek® GbE LAN chip (1 Gbps/100 Mbps) |
| USB | Chipset: 4 x USB 3.2 Gen 1 ports (2 ports on the back panel, 2 ports available through the internal USB header) 6 x USB 2.0/1.1 ports (4 ports on the back panel, 2 ports available through the internal USB header) |
| Bios | 1 x 128 Mbit flash Use of licensed AMI UEFI BIOS PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 |
| Audio | Realtek® Audio CODEC High Definition Audio 2/4/5.1/7.1-channel * You can change the functionality of an audio jack using the audio software. To configure 7.1-channel audio, access the audio software for audio settings |
| Memory | 11th Generation Intel® Core™ i9/i7/i5 processors: Support for DDR4 3200/3000/2933/2666/2400/2133 MT/s memory modules 10th Generation Intel® Core™ i9/i7 processors: Support for DDR4 2933/2666/2400/2133 MT/s memory modules 10th Generation Intel® Core™ i5/i3/Pentium®/Celeron® processors: Support for DDR4 2666/2400/2133 MT/s memory modules 2 x DDR4 DIMM sockets supporting up to 64 GB (32 GB single DIMM capacity) of system memory Dual channel memory architecture Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode) Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules Support for Extreme Memory Profile (XMP) memory modules (Please refer "Memory Support List" for more information.) |
| Remark | Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website. Most hardware/software vendors may no longer offer drivers to support Win9X/ME/2000/XP. If drivers are available from the vendors, we will update them on the GIGABYTE website |
| H/W Monitoring | Voltage detection Temperature detection Fan speed detection Fan fail warning Fan speed control * Whether the fan speed control function is supported will depend on the cooler you install |
| I/O Controller | iTE® I/O Controller Chip |
| Expansion Slots | CPU: 1 x PCI Express x16 slot, supporting PCIe 3.0 and running at x16 Chipset: 1 x PCI Express x1 slot, supporting PCIe 3.0 and running at x1 |
| Unique Features | Support for APP Center * Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications. @BIOS Ambient LED EasyTune Smart Backup System Information Viewer Support for Q-Flash Support for Xpress Install |
| Bundled Software | Norton® Internet Security (OEM version) LAN bandwidth management software |
| Onboard Graphics | Integrated Graphics Processor-Intel® HD Graphics support: 1 x D-Sub port, supporting a maximum resolution of 1920×1200@60 Hz * The D-Sub port is only available with the 10th Generation processors. 1 x HDMI port, supporting a maximum resolution of 4096×2160@30 Hz * Support for HDMI 1.4 version and HDCP 2.3. (Graphics specifications may vary depending on CPU support.) |
| Operating System | Support for Windows 11 64-bit Support for Windows 10 64-bit |
| Storage Interface | Chipset: 1 x M.2 connector (Socket 3, M key, type 2280 SATA and PCIe 3.0 x4/x2 SSD support) 4 x SATA 6Gb/s connectors Support for RAID 0, RAID 1, RAID 5, and RAID 10 Intel® Optane™ Memory Ready |
| Back Panel Connectors | 1 x PS/2 keyboard/mouse port 1 x D-Sub port 1 x HDMI port 2 x USB 3.2 Gen 1 ports 4 x USB 2.0/1.1 ports 1 x RJ-45 port 3 x audio jacks |
| Internal I/O Connectors | 1 x 24-pin ATX main power connector 1 x 8-pin ATX 12V power connector 1 x CPU fan header 1 x system fan header 1 x RGB LED strip header 1 x M.2 Socket 3 connector 4 x SATA 6Gb/s connectors 1 x front panel header 1 x front panel audio header 1 x USB 3.2 Gen 1 header 1 x USB 2.0/1.1 header 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only) 1 x serial port header 1 x Clear CMOS jumper |
